CL on 34gal Cube

[Interior_Reef]

http://www.reeflopumps.com/images/flow_charts.xls

straight from the manufactures site.

Originally Posted by Interior_Reef

http://www.reeflopumps.com/images/flow_charts.xls

straight from the manufactures site.

really annoyed that my computer is being a turd and I cant open the file...lol
any chance you could copy and paste it for me?

[Interior_Reef]

Originally Posted by UnderWorldAquatics

really annoyed that my computer is being a turd and I cant open the file...lol
any chance you could copy and paste it for me?

thanks!
One file on their site has this quote which confuses me...

"Friction loss increases at an
increasing rate when either flow is increased or pipe is narrowed. The narrower the line the more
the pump has to work (think clogged ateries and your heart)."

this is a copy and pasted quote from their site, this quoted explanation tells me that if I put a ball valve on the output of the pump and restrict the flow(narrow the output pipe), the pump is going to have to work harder.... tell me if Im nutz???

Im very confused because this below, is also a quote from the same page on their site... I find it very contradicting!!!

4. If your pump is producing too much flow, you can reduce the flow by partially closing a
valve on the discharge line. Never restrict the inlet!!! Surprisingly, this will make the motor work
less and use less electricity!! This “valving back” simply causes the pump to operate further back
on its performance curve.

Let me know what you think???

I have used these pumps alot for about 8 years, I think they are great pumps, but I do find these quotes contradicting!

[mark]

It's not unique to the Reeflo pumps which have the motor shaft fixed to the impeller.

I have a Iwaki MD70RLT (mag drive) as a return with a union/valve on the output. Full open 2.24amps, with the valve closed 1.45amps.

As for Reeflo statement, on the surface could be contradicting if trying to link the whole article, but taken separately okay if just trying to simplify the principle of reduced flow and head-loss against pipe size. I'll still be using their product.

Originally Posted by mark

It's not unique to the Reeflo pumps which have the motor shaft fixed to the impeller.

I have a Iwaki MD70RLT (mag drive) as a return with a union/valve on the output. Full open 2.24amps, with the valve closed 1.45amps.

As for Reeflo statement, on the surface could be contradicting if trying to link the whole article, but taken separately okay if just trying to simplify the principle of reduced flow and head-loss against pipe size. I'll still be using their product.

I think they are amazing pumps and as I mentioned, have been using them for about 8 years, mostly their larger pumps. Never realized they drew less power when restricted... Good to know!

[Chad]

Hmm, maybe I should not have sold my Reeflo Dart :-) ... but it is such a large pump, and you need to plumb in a huge bulkhead. Perhaps the Quietone will work. It sucks with the heat increase on the velocity. I really want a silent system.