![]() |
|
#1
|
||||
|
||||
![]() I wouldn't worry about it too much. Just make sure you have primer and the proper pvc glue and you should be fine. Before you glue just double check everything, and if you need to mark your pvc with a felt (so that you know which peice goes where) so be it.
|
#2
|
||||
|
||||
![]() i should be ok, the main thing is to try to figure out how to do it, becuase the plumbing is alrighty there and its alrighty running, and how to get water to go from there to there kind of thing
any ideas? ![]() |
#3
|
|||||
|
|||||
![]() I have what you describe and works no problem.
I'm tee'd into one of my drains but when testing, just feed with a small pump that was in the sump (worked well also). ![]() |
#4
|
||||
|
||||
![]() so many ideas! lol
|