![]() |
|
#1
|
||||
|
||||
![]() Got a Rio nano skimmer today. I can't run it out of the sump area as planned as it needs a stable, high water level. Too early to say how it will work--after a few hours, lots of bubbles in the tank and white foam starting to rise up the neck.
Should I scrape the brown diatoms off the glass or just leave it? There are lots of little "bugs" (pods?) feeding on it. Whatever the two kinds of creatures are on my rock that I mentioned, I seem to have lots of both. |
#2
|
|||||
|
|||||
![]() The stripey tentacled thingy is probably Spagetti worms which are fine in your tank. Can't really tell from the picture what the others are.
__________________
250 gal display tank plumbed directly to my wallet |
#3
|
|||||
|
|||||
![]() Looks to be a cross between a spaghetti worm and feather dusters (with tubes) its hard to tell, they blend in pretty well. Either way, both are good for the tank
![]() IMO, I'd leave the stuff on the glass for the pods to eat, it will only help your pod population. Scrap it off when it becomes too annoying for you but leave it if you don't mind it.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#4
|
||||
|
||||
![]() Thanks for the ID--I'll try to get a picture of the other ones soon, but the tentacles are very slim, so hard to capture on my not-so-great camera.
The brown diatoms have died down somewhat, starting to be replaced by green algae. I didn't see a lot of pods on the glass and wanted to "feed" my new skimmer, so I scraped it off today. I haven't been able to get the foam to climb more than halfway up the tube in the Rio, but I suppose I just need to be patient and keep fiddling with it. My water level is stable, so I hope it will stay adjusted once I get it right. Regards, Nevin |
#5
|
||||
|
||||
![]() 0 mg/L nitrite
0.6 mg/L ammonia 8.5 ph 9 dkh First time to test kh. It's much higher than my freshwater tanks have ever been--guess the sand and rock buffer it? I don't know what a desirable ph is for saltwater either. Everything is looking good--no algae at the moment and I've finally got some foam coming out the neck of the skimmer, though nothing falling in the cup yet. |
#6
|
|||||
|
|||||
![]() so thats just acrylic siliconed in?
__________________
Why are red buttons always the most important? |
#7
|
||||
|
||||
![]() Yes, I just cut up some acrylic and stuck it in. Works well, looks alright, and far cheaper than an "all-in-one".
Regards, Nevin |