|
|
|
|
|
#2
02-12-2008, 07:51 PM
|
|||||
|
|||||
Cyanoacrylate - I just use the stuff from the hobby shop in extra thick, its called Flashed glue.
|
|
#3
02-12-2008, 07:58 PM
|
|||||
|
|||||
|
You can get the gel type here at the dollar store in parkland mall. Both types work, but the gel is thicker. It has a red cap. Anything cyanocryalate is good, just look at the label. Loctite from home depot is same stuff
__________________
120g build thread 48g-upgraded to 120g old pics old 48g build thread Pics.... more recent pics seahorse pics
|
|
#4
02-13-2008, 02:15 AM
|
|||||
|
|||||
|
I tried the super glue. It worked good on sps and lps but trying to do any mushrooms or toadstools and I found there was too much water to stick. The epoxy didn't seem to have that problem.
__________________
250 gal display tank plumbed directly to my wallet
|
|
#5
02-13-2008, 02:17 AM
|
|||||
|
|||||
|
Sorry I should have mentioned that I only use it on SPS, or LPS.
|
|
#6
02-13-2008, 02:33 AM
|
|||||
|
|||||
|
I have been wondering what type would work for attaching zoo's to frag plugs? I have some of the epoxy putty, but I can't see that working very well.
Also as an aside, how is the best way to frag zoo's from a colony and then attach them to frag plugs? Not intending to hijack, just expand the scope a little bit...
__________________
My Tank: 135G display, 45G Sump, 20G top off. 2 x 400 W, Bullet 1.5, Snapper Return, Profilux. ------------------------------------------------------------------------------------------------------ My Photo Website
|
|
#7
02-13-2008, 02:53 AM
|
|||||
|
|||||
|
i still use super glue on zoas, but thats all I've ever kept for softies.
|
|
#8
02-16-2008, 04:28 AM
|
||||
|
||||
|
i have the two part epoxy and find it difficult at times. try sticking it in the microwave briefly once mixed together, and it should cure it faster. too long and it goes hard though
__________________
 65g/20g reef system, Euro RS-80, 2x tunze 6055, mod 6025, mag7, 250 HQI w/192 actinics, 100 lbs. LR 46g FOWLR
|
Hybrid Mode
