![]() |
#1
|
||||
|
||||
![]() Who else has these? I quite frankly can't stand it. The glass on my tank is 5/8s and I have to keep this thing at the lowest setting or it sounds like a jet engine It is slightly better when I align the magnet however still really loud and within 10 minutes it slips down and is loud again so the rating on the glass thickness is crap. It is in an in wall tank and there are plenty of other things that should be louder than this but it is all you hear. It is not much good having a powerhead that is capable of doing 3000gph down to 300.
Basically put it is the worst $500 I spent for my tank. Go with a SEIO on a big tank. |
#2
|
|||||
|
|||||
![]() thats bunk, i was planin on buyin a few of them. mabey ill try them in the reef wich is only 1/2" glass but the 300g i think is 5/8 so mabey ill look into something different like mabey those polario powerheads or mabey 20 mj1200's
__________________
but what the heck do i know |
#3
|
||||
|
||||
![]() i have them on mine... glass is half inch. pretty much silent
|
#4
|
|||||
|
|||||
![]() i had 2 and they sucked. were very noisy and when i took them apart i found they were rusting inside and the metal disc had been grinding on the cover, so who knows where that metal went
|
#5
|
||||
|
||||
![]() Every month or so mine would slip and become noisy, it is also on 5/8". About six months ago I took it apart and removed the plastic spacer that is suppose to be removed if using the unit on 3/4". It has worked flawlessly since. So quiet and unobtrusive I am considering buying another.
|
#6
|
||||
|
||||
![]() I just tried to take the spacer off and to tell you thetruth it is louder...perhaps there is something wrong with it.
|
#7
|
||||
|
||||
![]() So this piece of crap...I took it out to put the spacer back in. It has literally welded together and will not come apart period. I am taking it back tommorow. I have been prying to get the sucker apart for the last hour.... This must have been a dud.
|
#8
|
||||
|
||||
![]() After about 10 minutes with some grips and some help from Dennis at golds it broke free. He gave me a replacement which I put on the tank. It is not nearly as loud so the other must have been a dud. I would not call them the quietest powerhead around but works a lot better than the last one
|
#9
|
|||||
|
|||||
![]() good to hear that its better. For $500 I would hope so...
|
#10
|
|||||
|
|||||
![]() Try a stream pump next time your thinking about slapping a few hund on a pump.
__________________
M2CW |