halide upgrade-need help!

[michika]

You may want to do both, and you can also consider reducing your photoperiod.

[bv_reefer]

my photoperiod is currently 12 hours, from noon to mid-night, so i think i'll start by hanging it 12'' abover water surface, couple layers of eggcrate, and reducing photoperiod to 8 hours to start, thanks again

[Reefer Rob]

8 hours of 400W is a lot of light (especially for a 33 gal). I think that should be your max! You might get away with more with a 14K or 20K bulb. I would start with 4 hours or less and work up slowly. Keep a close eye on your corals, and be ready to dial it back if you see any distress. Do you have a chiller?

[bv_reefer]

no i don't have a chiller but i'll keep the bulb at 12'' above the surface to reduce the heat, and i guess turn the heater down a bit if that helps

[Drock169]

400 seems overkill to me, I wouldnt have gone with more than a 250. But I agree with everyone else, increase height from surface, reduce photoperiod, and use a higher K bulb.

[bv_reefer]

i'm getting an XM-400 watt 14k bulb, 12'' off the surface minimum, start a photoperiod of 3-4 hours, gradually work it up to 6-8 hours-

heres all my corals and inverts, think any of them will take the lighting change really negatively?

-xenia colony, ricordea, 2xfinger leather colonys, monti cap,cup coral(lps one), kenya tree, long tentacle plate coral, condy anemone, green star polyps-

[michika]

400w is okay, I did it on a 46g and got great results. Just remember to watch your temperature and be ready to acclimate all your new purchases in the future.