Michika's 28g long nano-esque tank!

[Edmonton Eskimo]

I still haven't seen a full shot of everything! Why are you doing this to me

[Edmonton Eskimo]

I wonder if you can drop the actinics down even with the bottom of the reflector. This should eliminate some of the shading.

[Brent F]

Originally Posted by Edmonton Eskimo

I wonder if you can drop the actinics down even with the bottom of the reflector. This should eliminate some of the shading.

Another idea that might work - install them at a 45 degree angle low on the sides of your hood instead of the top. Might be able to get some light to the middle. Would need to play around to figure out what angle gets light to the middle without excessive light bouncing off the water surface.
________
FXR150

[michika]

Well I want to put the luminarc on a slider system, and maybe I can put the actinic down at the edge and tilt them like you suggested. I wonder if my actinics will even reach the center of the tank.

[Brent F]

Originally Posted by michika

Well I want to put the luminarc on a slider system, and maybe I can put the actinic down at the edge and tilt them like you suggested. I wonder if my actinics will even reach the center of the tank.

could work - Kind of like this?

________
Honda RC161

[michika]

That is awesome, and exactly what I was thinking. I'll have to make something to allow all the lighting to slide together on a slider. etc.

[michika]

This weeks update:
Parameters for January 13th
SG 1.025
Nitrate, Nitrite, and Ammonia 0ppm
phosphate 0.05mg/L
Mg 1380
dKH 10
Ca 500

I'm still dosing daily. I've also added a few more SPS to my system, and I've started using filter socks again. The other change I've made, is that the skimmer has been replumbed so the output is no longer right above the imput for the pump. Between the filter socks and the replumb I've seen about an 80% reduction in microbubbles. However, the bubbles do return if I put my hands in the tank for any reason.

Photos
Re-plumbing the skimmer. This is it before with its metric plumbing.


Filing out the inside of a reducer


Reducer on the stand pipe.




The new plumbing isn't the most graceful looking thing, but it gets the job done for now.


Filter Socks after 2 days (yuck)


I still have a few more things to do to the system to get it to where I want it. I am excited to have a system again that will require little if any weekly maintenance (other then water changes, feeding, and dosing).

FTS and photos of my new aquisitions to follow.

[michika]

Originally Posted by Edmonton Eskimo

I still haven't seen a full shot of everything! Why are you doing this to me

I'm doing 'cause I'm mean and like to tease you

The lights just came on so here you go. I'll take something nicer in the future after I'm done cleaning up the tank.

[Edmonton Eskimo]

Nice! I'm glad it looks good. Now we just need to remove that growth from your camera lens... Oh wait that's a dog! Your dogs are such camera hogs

[michika]

Yeah they are bad, Matia is the worse though.