Skimmer Suggestions.

[Doug]

Dale, either the 36in. beckett I had from Jayson or the 32in. MR3 from Myreef would handle it.

Both are similar to the Bullet 3 and as Troy says, just need a larger pump. Like Troy, I also drove it with a Mak4, but had to close the valve a fair bit to get the level higher. With something like an Iwaki 70, you would be able to run the level below the first flange and drive foam all the way up.

Also you could use a similar size beckett, but have two injectors. Andy, a friend in Ontario has one like that and uses a pair of Mag 24 pumps to drive it.

Orrrrrrrrrrrr, for the bucks, perhaps a 12in. by 36in. Euroreef with a pair of Sedra 5000 pumps.

If it were mine, I would run:
-a 36inch single beckett powered by an Iwaki 70
or
- a 36inch duel injector beckett, powered by a pair of Mak 4 pumps.

Made by Jayson, {Saltwater Connection}, or Andy, {Myreef Creations}, or of course our very own Titus, {Canreef}.