Are These Any Good - Galaxy Electronic ballasts

[JoelV]

This is a common problem, Depending on your setup its best to wire directly to the back of the mogul socket (black wire to the brass nut) using the lamp cord that came with your ballast.
Where did you buy your galaxy from?

[albert_dao]

Originally Posted by JoelV

This is a common problem, Depending on your setup its best to wire directly to the back of the mogul socket (black wire to the brass nut) using the lamp cord that came with your ballast.
Where did you buy your galaxy from?

Me.

[Josh23]

not sure I'm following you Joel.

You're proposing I should hack off both the plugs (female on the ballast and male on the reflector) and just join the wires or am I missing something?

OR

Open the ballast and cut the individual cords inside and then cut the reflector cord and hardwire it within the ballast???

Josh

[JoelV]

I was assuming you have the lamp cord that originally came with the ballast. the ballast has a female out and the lamp cord has the male in. the other end of the lamp cord should be bare wires that you can directly connect to your mogul socket on your reflector eliminating the one that is already there. If you don't have the original lamp cord then i guess the easiest option is to just cut and connect. You can also just cut the female end of the ballast and install a regular female plug end if you have enough wire there and a male to the lamp side to make the connection. keep your lamp cord as short as possible.
Good luck.

[Josh23]

Originally Posted by JoelV

I was assuming you have the lamp cord that originally came with the ballast. the ballast has a female out and the lamp cord has the male in. the other end of the lamp cord should be bare wires that you can directly connect to your mogul socket on your reflector eliminating the one that is already there. If you don't have the original lamp cord then i guess the easiest option is to just cut and connect. You can also just cut the female end of the ballast and install a regular female plug end if you have enough wire there and a male to the lamp side to make the connection. keep your lamp cord as short as possible.
Good luck.

I have the cord that is attached to the reflector (male end) and the a small 4" cord coming from the ballast (female end). From you're email it seems you suggesting running the small 4" ballast cord directly to the reflector? but thats not possible with the short cord. I thinks thats what your saying?

The alternative you mentioned cutting both cords, can I just replace with a standard 3 prong electrical plug (similar to an extension cord) or will this not work? I'd prefer this method over just cutting and taping back together.

thanks again.

Josh

[JoelV]

originaly the ballast would have come with an additional 10 ft of lamp cord and the male end.

ya just install regular cord ends of good quality

[Josh23]

Originally Posted by JoelV

originaly the ballast would have come with an additional 10 ft of lamp cord and the male end.

ya just install regular cord ends of good quality

perfect thats what ill do, my ballast didnt come with a 10ft lamp cord, its brand new, maybe they don't include the cord anymore.

[Jason McK]

No they do not include the cord that attaches to the mogel. It's their way of making you buy their reflectors

You could always order one through OA http://www.sunlightsupply.com/produc...s%3D%26pgi%3D1

J

[albert_dao]

Originally Posted by Josh23

perfect thats what ill do, my ballast didnt come with a 10ft lamp cord, its brand new, maybe they don't include the cord anymore.

It doesn't come with the lamp cord. That's part of the pendant. It does come with a 10-ish foot power supply cord though.

Originally Posted by Jason McK

No they do not include the cord that attaches to the mogel. It's their way of making you buy their reflectors

You could always order one through OA http://www.sunlightsupply.com/produc...s%3D%26pgi%3D1

J

Or you could just get it from me since that's where the ballast came from :P