How is Instant Ocean's salt?

[StirCrazy]

Originally Posted by Myka

What SG are you guys using??? IO Mg is right on target from my measurements using Salifert test kits.

I also find it's cheaper to buff up the Calcium on my waterchange water than it is to buy more expensive salt.

If you are getting the numbers you posted above from IO you must have a special batch.

While I do think IO is one of thebetter salts it is horably low in Mg like any other salt as Mg is an expensive additive. If you start a tank with it after a week check the MG and adjust it up to about 1350 to 1400ppm. This will also cause your Ca to raise if it is being supressed by low Mg.

I wouldn't worry about raising a 390 Ca level as that is about as perfect as you can get.

Steve

[Doug]

I do the same as Ben. Between the IO and the mag. & calcium, its still cheaper than most. My tank magnesium stays @ 1350 ppm and no precipitate in the mixing bucket.

As long as I can purchased those additives for a decent price and the salt for similar, thats what I will stick with.

[Myka]

Originally Posted by StirCrazy

If you are getting the numbers you posted above from IO you must have a special batch.

While I do think IO is one of thebetter salts it is horably low in Mg like any other salt as Mg is an expensive additive. If you start a tank with it after a week check the MG and adjust it up to about 1350 to 1400ppm. This will also cause your Ca to raise if it is being supressed by low Mg.

I wouldn't worry about raising a 390 Ca level as that is about as perfect as you can get.

Steve

I'll test my IO next time I test my tank (hmm...I never do that anymore lol). But now I am interested since everyone seems to have such different readings than me. When I was testing my tank regularly the Mg was staying ~1380 ppm just with waterchanges. I like to keep my Calcium over 400 ppm so I do bump it up a bit. I aim for ~420 ppm. Alkalinity is always bouncing around between 7-12 dkh. I haven't been able to get it overly steady.