![]() |
|
#1
|
|||||
|
|||||
![]() A week worth of skimmate;
![]() The tank is chugging along. Things seemed to have plateaued at this point. No improvements in anything, water parameters included. Its a bit disheartening not to see any changes in what was supposed to be my dream nano system. I'm still plagued by microbubbles, and while I was hoping to have the problem solved last week, plans changed. I now need to make another trip to the hardware store as I'm going to replumb my skimmer as well as using filter socks in the future. |
#2
|
|||||
|
|||||
![]() good to hear Catherine, I will make ya a deal once i'm back from Afghanistan if you are looking for a bigger tank you come down to manitoba and I will give you my 120 gal with tank and stand if you want too.
If ya want too. since I will have my cube going I hope by then .....next summer once I get back but your going to have to give me ahand to load the other tank...
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
#3
|
|||||
|
|||||
![]() What do you think your snapper pumps head loss is with that manifold you built? I am thinging of doing something similar, though maybe half around tank instead of full. But my overflow is 1300-1600 gph...so i might need to go up to a dart...just trying..quite unsuccesfully to do the numbers in my head.
__________________
I once had a Big tank...I now have two Huskies and a coyote |
#4
|
|||||
|
|||||
![]() Quote:
![]() ![]() Quote:
The manifold works well for two reasons; it provides a lot of flow throughout the tank, and not just in a few areas, and its adjustable. The downside so far though is that the lockline is causing some shadowing, but I think that is more of a lighting issue then anything. If you can, go for the Dart. You can always choke it back with no harm to the pump. Is this for your big system you just bought? Is it in Didsbury? We are coming out through Didsbury on the 26th! |
#5
|
|||||
|
|||||
![]() Yep its for the big system. I was going to go with a mag 18 for a return, but then i would need to plug up the bulkheads in the sump. I figure about 4-5 feet vertical and maybe 2 feet horizontal for head loss. I was thinking the snapper, but was afraid it would be cut back to much with a manifold. The sump has a bulkhead very near or the same as the inlet size on the dart/snapper so figured it would be easy, plus i like the energy ratings of the snapper. So many choices....but for 171 vs 234 at jl it mkes it even harder to decide. I've heard good things about both pumps...but i think with the head loss the mag would be underpowered. I have also decided to not really utilize the baffles in my sump and to fill the water over them. I think to much of the sump is wsted withthe heaght of the baffles that are in it now. I have to work boxing day
![]() Now i hafta run out and get some epoxy to finish up my stand. Good christmas project ![]() EDIT: I cannot spell, I aplogize but i don't feel much like fixing the inumerable errors...
__________________
I once had a Big tank...I now have two Huskies and a coyote Last edited by Pan; 12-25-2007 at 05:54 AM. Reason: I cannot spell... |
#6
|
|||||
|
|||||
![]() I understood what you were saying, so errors or not, it doesn't matter. Sorry about having to work Boxing Day, that does suck. Maybe with that setup look at the Dart. I know the purchase costs between the two are just $5-10 apart. From what it sounds like I would probably go with a Dart on the system you described.
You should start your own tank journal, with photos! Then we can all watch the progress. |
#7
|
|||||
|
|||||
![]() I was just looking at your webpage Catherine. Have you thought about the black sand that you had in your tank, caused the bloom of algae
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. Last edited by Skimmerking; 12-25-2007 at 03:03 PM. |