|
|
|
|
|
#1
12-19-2007, 06:35 PM
|
|||||
|
|||||
Ah, perhaps I will try raising my sump water level. In the directions is says 5-6" inches if I recall, perhpas I will try a little higher.
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2 
|
|
#3
12-20-2007, 03:43 AM
|
|||||
|
|||||
|
Quote:
http://www.euro-reef.com/ER%20Manual...06-19-2007.pdf
__________________
Never argue with an idiot. They bring you down to their level and beat you with experience.
|
|
#4
12-20-2007, 06:03 AM
|
|||||
|
|||||
|
Might just be a breaking-in issue? What size is the output pipe, if it's something like 1" maybe you can replace it with a slightly longer pipe .. or maybe think about pulling it and replacing with the gate valve .. It's a pretty easy mod (usually) and gives you more control over the water level. The hard part is finding the gate valve!
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
|
#5
12-20-2007, 06:22 AM
|
||||
|
||||
|
Thanks for the reply...ya I figure it might be breaking in still, not sure. I sent a quick email to ER so I will see what they say. I will probably do the gate valve mod down the road, seems like everyone that does it is happy.
Thanks!
__________________
60 Gallon rimless, internal Herbie overflow, ATI Powermodule, Eheim 1250, 2X Tunze 6055, Tunze ATO, Euroreef RS100, Profilux controller, TLF Reactor.
|
|
#6
12-20-2007, 12:54 PM
|
|||||
|
|||||
|
I'm thinking I will go with the gate valve mod too. I'm thinking I need to find a good online source for PVC gate valves, buy in bulk and sell on canreef for a profit because you cannot find them here.
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2
|
|
#7
04-17-2008, 06:07 PM
|
||||
|
||||
|
Bit of an old thread, just wondering if you did the gatevalve mod Greg? Did it help? I seem to get noise from the airline sucking air. The tube is clean, and I have the valve off, but its still somewhat noisy. Any thoughts?
__________________
60 Gallon rimless, internal Herbie overflow, ATI Powermodule, Eheim 1250, 2X Tunze 6055, Tunze ATO, Euroreef RS100, Profilux controller, TLF Reactor.
|
|
#8
04-17-2008, 06:13 PM
|
|||||
|
|||||
|
You could make the airline longer. I remember doing that on an old CPR bakpak skimmer I had and it worked like a charm. I had my euroreef hooked up to an ozonator so it has a super long line on it. I just realized that I hadn't removed it (not using ozone anymore) but no sucking sound (like I could hear it over the other various noises my tank makes anyways
 )
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
|
|
#9
04-17-2008, 06:18 PM
|
||||
|
||||
|
Huh, good suggestion, I will try that thanks!
__________________
60 Gallon rimless, internal Herbie overflow, ATI Powermodule, Eheim 1250, 2X Tunze 6055, Tunze ATO, Euroreef RS100, Profilux controller, TLF Reactor.
|
Hybrid Mode
