80g Cylinder Tank

[danny zubot]

You are very lucky to have that type of tank, I've always loved them but can't afford one.....yet.

I used to have a 54 gallon corner tank which is also a pretty ood shape. my biggest issues with it were getting the flow right and lighting. I think you should should have an easier time with lighting for a cylinder shaped tank than my old pie shaped tank. Any 24" light should fit over it. I would put a MH/T5 combo over that tank if it were mine.

As far as flow goes, good luck! Right off the bat I'm thinking a closed loop through the bottom would work well. Do you know if the tank bottom is tempered? Do you have an overflow.

[Telford]

Yes...it's a center overflow with sump and filter in a cabinet underneath.

[danny zubot]

what are you using for flow right now?

[untamed]

The obvious answer is to get the flow going clockwise for a while...then have it reverse and go counter-clockwise for a while...then...

That's what I did with my hex tank and it worked well. I used a SQWD, but you would probably want more control over the timing of the flow reversal than a SQWD offers.

[Telford]

Untamed - thanks for your response. Can you tell me what the reasoning is behind having the current switch back and forth and why it's neccessary.

Also, how big was your hex tank?

Thanks

[digital-audiophile]

I would lovwe to see some pictures of the tank

[Telford]

Attachment 2162 not the best pic but gives you an idea

[untamed]

Originally Posted by Telford

Untamed - thanks for your response. Can you tell me what the reasoning is behind having the current switch back and forth and why it's neccessary.

Also, how big was your hex tank?

Thanks

It was a 30gallon. The flow question has already been answered.