|
|
|
|
|
#1
12-09-2007, 02:49 PM
|
|||||
|
|||||
i used it as the instructions stated. nothing was rigged up.
now one side is rigged up. i will take pics shortly, as soon as i can locate my camera. 
|
|
#2
12-09-2007, 03:00 PM
|
|||||
|
|||||
|
did the wire slip out of the little clamp? you can replace the wire with a gear cable from a bike for $2.50 if its wrecked but mabey you just didnt have the screw tight enough to hold the wire in place.
__________________
but what the heck do i know
|
|
#3
12-09-2007, 03:32 PM
|
|||||
|
|||||
|
Found the camera,..
ok. the little nipple thing that you would press in to lower the light Here is a shot of the good side.      Here is the broken side. The threads on this piece split. i could actually take the light down again and take a picture of whats left. But im not removing it until new hanging kit arrives.    
|
|
#4
12-09-2007, 09:51 PM
|
|||||
|
|||||
|
so was it the cable that frayed or was it a problem with the chrome thing that holds the cable?
__________________
but what the heck do i know
|
|
#5
12-10-2007, 04:24 AM
|
|||||
|
|||||
|
Chrome thing that holds the cable. it split in half.
|
|
#6
12-10-2007, 12:52 PM
|
|||||
|
|||||
|
mabey the nut was over tightened?
__________________
but what the heck do i know
|
|
#7
12-10-2007, 01:18 PM
|
|||||
|
|||||
|
nope, could slide it both ways in the holder.
i have a new one waiting for me now thanks to Dan @ Hidden Reef.
|
Hybrid Mode
