Profilux II plus aquarium controller

[egareef]

thanks.

[egareef]

hello,

I have another question (I want to connect two tunze 6055):

I have connected to L1/L2 the module EVG-AP 2F with a single dimmable balasts (L1) and free L2. To L3/L4 I have connected MoonWB (L3) and free L4.

If I buy the module YL2-1 (connected to L3/L4), I can connect MoonWB and a tunze 6055.

how can I connect the other tunze?

thank you

[Matthias Gross]

you need 2 splitters and 2 cables "ProfiLux-Tunze 2".

Then L2 would be one pump, L4 the other.
Of course the second channel of your EVG-AP would work synchronously to the pump which is connected to L2, but this is not a problem.

If you don't want this you should insert a card with extra 1-10V-interfaces like the PLM-2L4S or PLM-4L.

[egareef]

Thank you

[Tom R]

Hi Mattias

I just received my Profilux Plus II and have a question.

I am have a small problem with the main Profilux Plus II module. The main screen does not light up. The 5 selection buttons the circle with up and down arrows both light up but the information screen does not. Is there something within the program or the module that I need to do.


Tom Ratcliffe

[wrang]

Any uppdates!?

[bullit67]

OK I give up I want to update my firmware but I can not connect to my Profilux I have tryed using the LAN connection with no luck I then went out and picked up a USB too RS232 (serial) adaptor and still no luck any one have any ideas I have been working on this all day today and this isant the first day I have wasted trying to get this to work. The profilux is still using the origanal firmware from when I got it last year ver.2.03

any help would be great

Doug