Profilux II plus aquarium controller

egareef · #1 12-09-2007, 08:44 AM

Thanks, but..

No, the unit number 4 I still do not use it.

But,

unit 1 started to 00:00 hours
unit 2 started to 00:07 hours
unit 3 started to 00:15 hours

all perfect one.

The hour can be changed to start?

Thanks

Matthias Gross · #2 12-09-2007, 08:48 AM

Hi

in dosing mode the start time can't be changed, the times are calculated automatically. If you want to dose at specific times you have to use a timer instead of the dosing function.

egareef · #3 12-09-2007, 12:23 PM

thanks.

egareef · #4 12-13-2007, 12:16 PM

hello,

I have another question (I want to connect two tunze 6055):

I have connected to L1/L2 the module EVG-AP 2F with a single dimmable balasts (L1) and free L2. To L3/L4 I have connected MoonWB (L3) and free L4.

If I buy the module YL2-1 (connected to L3/L4), I can connect MoonWB and a tunze 6055.

how can I connect the other tunze?

thank you

Matthias Gross · #5 12-14-2007, 06:52 AM

you need 2 splitters and 2 cables "ProfiLux-Tunze 2".

Then L2 would be one pump, L4 the other.
Of course the second channel of your EVG-AP would work synchronously to the pump which is connected to L2, but this is not a problem.

If you don't want this you should insert a card with extra 1-10V-interfaces like the PLM-2L4S or PLM-4L.

egareef · #6 12-14-2007, 08:40 AM

Thank you

Tom R · #7 12-21-2007, 06:56 PM

Hi Mattias

I just received my Profilux Plus II and have a question.

I am have a small problem with the main Profilux Plus II module. The main screen does not light up. The 5 selection buttons the circle with up and down arrows both light up but the information screen does not. Is there something within the program or the module that I need to do.

Tom Ratcliffe