|
|
|
|
|
#1
12-05-2007, 05:09 PM
|
|||||
|
|||||
Quote:
Are you the same guy selling the rear skid on dootalk?
__________________
Murray I reserve the right to hijack any thread I want to!! My carbon footprint is bigger than your carbon footprint !!!! 
|
|
#2
12-06-2007, 01:14 AM
|
|||||
|
|||||
|
Quote:
|
|
#3
12-10-2007, 04:30 PM
|
||||
|
||||
|
wow nice tank, could have done a better job on the finish though!!!! hahaha
|
|
#4
12-10-2007, 11:57 PM
|
||||
|
||||
|
well i suppose if you dont like the setup i could just take it back :P im sure i could find some room
 Richard
|
|
#5
12-10-2007, 11:57 PM
|
||||
|
||||
|
oh and welcome to the board Matt
Richard
|
|
#6
12-11-2007, 12:34 AM
|
|||||
|
|||||
|
Sweet! Albert showed my your thread on the weekend and I went with the same setup (although 90G) after looking at your picks on the dual return out the sides of the ovwerflow. The only thing I did different was had black plastic put surrounding the overflow so it hides the plumbing.
Albert has the anti siphon on some of the tanks on the back and they seem to work great, you are considering not using that design though? On my current 90 I have my return pump throttled back to maybe 1/4 so with this design even if it creates some headloss for me I still have lots of pump power left. I look forward to seeing this tank up and running with livestock 
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2
|
|
#7
12-11-2007, 12:36 AM
|
|||||
|
|||||
|
I do have one question on the sump, and maybe Albert can answer, but he showed me the same design with the baffle/bulkhead/ball valve, I see the value in doing this to dial in the correct water height for the skimmer... but would the evap come from the skimmer chamber is the overflow is draining into the other chamber?
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2
|
Hybrid Mode
