![]() |
|
#1
|
|||||
|
|||||
![]() What methodology do you plan on using? Bare Bottom, SSB, DSB, etc etc. This will help determine what equipment you may or may not need. What equipment do you have now that you are going to reuse? A little more info would allow us to give you more detailed answers. Otherwise you'll just end up getting general answers...
__________________
32"x32"x20" Cube-ish tank |
#2
|
|||||
|
|||||
![]() Quote:
__________________
Everything I put in my tank is fully dependant on me. |
#3
|
||||
|
||||
![]() Well, prefferably i wanna get live sand. Apprx 2 inches deep. I HATE bare bottoms. And i plan on having fish, corals(hard and soft), and inverts. I basically wannna get it so that it looks exactly like ya took a shovel and took it outta the ocean.
Which is why i dont like bare bottoms, i dont think they look as natural. |
#4
|
|||||
|
|||||
![]() Building a ref aquarium is a very slow and involved process. I'm sure through your reading you have discovered that there are many theories behind each piece of equipment you purchase.
I would suggest you see what you can afford. If 100G is the room you have then go with a 100G. From there i would research Lighting, Skimmers, Sump design and come back to Canreef and ask specific questions about each piece. It will be a lot easier for use to comment on a piece of hardware rather than generalize. But for an Idea of what I believe you will need. Tank and Stand Sump Lighting Skimmer Method of flow (closed loop, power heads) a way of maintaining Calcium and Alk (daily doseing, CA reactor, Kalk Reactor) Live rock Sand Timers or controller PH monitor Test kits Salinity measurement device Heaters J |