|
|
|
|
|
#3
11-05-2007, 07:22 AM
|
|||||
|
|||||
Not sure. 4 guys (me, Canadian Man, two guys from Bow Valley) huffed it off the truck and then grunted and swore it all the way into the house and down the stairs and around a couple corners... So I reckon maybe 400lbs? Complete WAG on my part though.
Ok so I guess Tuesday night is a go, pending one thing though - let me see if I can arrange for the suction cup things on Monday. Will post back. Also I guess I need to PM everyone my address and phone number. Thanks to all who've offered. You have no idea how much I appreciate this! Thanks!
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! 
|
|
#4
11-07-2007, 06:26 AM
|
|||||
|
|||||
|
Many hands make for light work? Thanks guys, you're awesome!!!
 
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
|
#5
11-07-2007, 02:00 PM
|
|||||
|
|||||
|
Very nice! So whats the next step?
|
|
#6
11-07-2007, 02:21 PM
|
|||||
|
|||||
|
Yay! The beast is alive. Get that sucker filled with water now!!
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
|
|
#7
11-07-2007, 02:37 PM
|
|||||
|
|||||
|
So who is everyone in the picture. Need name tags
J
|
|
#8
11-07-2007, 04:27 PM
|
|||||
|
|||||
|
Quote:
 ). But I'm hoping that with a lot of the junk cleared out of my way in the basement that things can progress at a better pace from here on forward.Next up, I have to finish (well, OK, "start" and finish) the drawings so I can get my permits all lined up. And of course, go to City Hall and apply for the permits. I need to find my @$%#%$#%$!! spirit-level and shim the stand if needed. According to my wee little level (6") it's pretty close to level but I'd feel better using my "real" level before starting any further framing. Frame the walls adjacent to the tank and hang a door. Plumbing and electrical, move the laundry sink over, install a proper tap (hot and cold water) Tank hood (I'm thinking an aluminium frame for hanging the reflectors), and skirting around the canopy. I have to re-route some my HRV venting because the way it was done is sorta ... for lack of a better word, "dumb". It comes over to a beam and then has a U-bend that goes under the beam. Whereas it could just come out a bit to the side of the beam and then come straight across into the tank room. Buy a sump return pump and get cracking on the plumbing.. Get the electrical and anything else inspected and the OK given, then I can drywall, mud and paint. At that point I can start filling! Gonna be a busy few weeks ahead of me.  Or months. I sure hope it won't be another two years.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! Last edited by Delphinus; 11-07-2007 at 04:29 PM.
|
Hybrid Mode
