Calcium reactor recomendations

[Gools]

I have a schuran, you don't need a peri pump to use it. I bought a needle valve, and it worked perfect. I have 2 peri pumps that i never hooked up to it.

After the schuran I would recommend a GEO. Only 2 I would look at.

[trilinearmipmap]

I have a Barr Aquatics calcium reactor I got from Austin Oceans.

They do have thumbscrews on the top for refilling, I don't see the issue there, you refill the media maybe every 6 months give or take?

It is the only Ca reactor I have ever had but IMO it is absolutely excellent.

Lots of great features. Dual recirc design. Built-in flow meter. Built-in bubble counter. Port for pH probe. Can be run either with no feed pump or from a Maxijet or teed off the return line. It has a very compact design. Overall it has been very easy to use and I recommend this calcium reactor 100%.

[Pescador]

Thanks Tony, I can relate, I'm looking at everything you are except my
T-5's are still okay.
Had to rush out at supper time and pick up a new Blueline return pump cuz my Turbosea quit. (That's what happens when you don't clean it for 2 years ). But it's okay after a 4 day soak so I have a backup now.
I have to clean my streamrocks again in less than 2 months so I've been looking at a wavebox's.

What I've gathered on the CA reactors, Deltec is fluidized and has a bayonet lock on the top. (at twice the price of most others).

Geo's seem to get great reviews, PH port, and key hole slots in the lid.

Schuran is high flow low pressure, you regulate the flow on the input side instead of effluent side. Sounds like pulling the effluent through with a peri pump is the most consistent way to feed it.
It does have 8 thumbscrews (4 on top, 4 on bottom) but the whole media chamber comes out so you can take it to the sink for refilling.

I'd like to just feed it from a tee in my return so Gools I'm curious how you have yours set up. Is the needle valve on the input side?
What's your flow rate?

And thanks trilinearmipmap I'll have a look at the Barr's.

Talk about spending money in your head, it looks like this Sony projector is crapping out and oh yeah my wedding and honeymoon are in a week!

[Gools]

Right now I don't have it setup, moved Provinces and am in the midst of setting up another. But I had it tee'd off a mag 2, with the valve before the reactor. You don't want back pressure in the reactor. As for flow I mostly watched for my Ph, trying to keep it at 6.3-6.5. And watched my Alk level and made adjustmeants from there. But I think I was running about 130 bpm, and had a flow of 250ml a minute. (I have it writen down some where) On a heavily sps stocked 180.