Urgently need 2" Gate Valve!

[untamed]

If you are in that much of a hurry, use your knife valve and put a union above and below it. If the knife valve doesn't allow for accurate enough adjustment, you can replace it later with a better valve and you have time to find it.

Worst case is that the knife valve doesn't allow you to perfectly tune the Herbie. All that means is that you'll have a small trickle flowing down the emergency pipe. No big deal...just not perfectly silent.

[GreenSpottedPuffer]

Originally Posted by untamed

If you are in that much of a hurry, use your knife valve and put a union above and below it. If the knife valve doesn't allow for accurate enough adjustment, you can replace it later with a better valve and you have time to find it.

Worst case is that the knife valve doesn't allow you to perfectly tune the Herbie. All that means is that you'll have a small trickle flowing down the emergency pipe. No big deal...just not perfectly silent.

Well I shouldnt really be in such a big hurry but I have 6 QT tanks all over the apartment and a few friends staying with me a a week and a half. I really wanted to have everything done soon and I have a few days off now. I really do not want to rush things though. I will look for the Gate Valve tomorrow from either EMCO or this place called Pioneer Plumbing (they claim to have all kinds of rare plumbing). Hopefully I find one! I have to go to the same area to get glass cut for my overflow tomorrow anyways.

[Delphinus]

You know, everytime I go camping on the coast and drive out, I see this enormous irrigation supply store from Highway 1 as I get into Abbotsford. I'm sorry I don't recall the name but I think Marc (Superfudge) told me that's where he's gotten a whole bunch of really cool plumbing parts. It's a bit of a long shot but it might be worth looking into. PM Superfudge and ask him the name of the place .. sorry my tip is a bit "out there" but it just occured to me and I think it might be worth a shot...

[GreenSpottedPuffer]

Originally Posted by Delphinus

You know, everytime I go camping on the coast and drive out, I see this enormous irrigation supply store from Highway 1 as I get into Abbotsford. I'm sorry I don't recall the name but I think Marc (Superfudge) told me that's where he's gotten a whole bunch of really cool plumbing parts. It's a bit of a long shot but it might be worth looking into. PM Superfudge and ask him the name of the place .. sorry my tip is a bit "out there" but it just occured to me and I think it might be worth a shot...

Yeah thanks, I mean any tips would are great. I am going to call a few more places that are really close to me tomorrow morning and then go from there. I have no car right now, so going out to abbotsford is hard. I can get a ride though...Or rent a car if I were desperate enough!

[Bryan]

Have you checked out a place on venables in Vancouver, I beieve they are called Vancouver Irrigation. I would be surprised if they DIDN'T have it.

[cole004]

I picked mine up at Southern Drip in Chilliwack http://www.southerndrip.com/index.html A little pricey but a nice drive on a Saturday and you could stop at Hidden Reef on the way home.

[Delphinus]

I wonder if this might be the place I'm thinking of. I said Abbotsford but come to think of it I think I meant Chilliwack. Sorry, my bad.

Originally Posted by cole004

I picked mine up at Southern Drip in Chilliwack http://www.southerndrip.com/index.html A little pricey but a nice drive on a Saturday and you could stop at Hidden Reef on the way home.

[GreenSpottedPuffer]

Originally Posted by Bryan

Have you checked out a place on venables in Vancouver, I beieve they are called Vancouver Irrigation. I would be surprised if they DIDN'T have it.

They do not. Again only up to 1.5".

[GreenSpottedPuffer]

Well I found one! Thanks to Tman1973 for being nice enough to PM me and say he would sell me one. Saves a lot of hassle!