Jul 24/07 - Koralia Pumps in stock, all sizes

[Der_Iron_Chef]

Actually, the Nanostream 6025 is rated at approximately 660gph. The 6045, however, is rated at 1189gph.

[albert_dao]

Oops, my bad.

Was going with the first link on google:

http://www.jlaquatics.com/phpstore/s..._ID=tz-tsn6025

"The Turbelle nanostream combines aesthetics and function. This innovative circulation pumps sets new records. At a diameter of only 2.7", it enables a waterflow of up to 1189gph at an energy consumption of only 8 watts."

[spikehs]

i have the #4, it replaced 2 nano streams for me... my nano's were noisey and unreliable... the #4, is AWSOME in my 50gal tank, tons of flow and completly silent... not quite as small as the nano's but better overall i'd say.

[TC51]

As well, on the seio controller, you can run quite a few more koralias that you could Seio's due to the extrememly low wattage.

Forgive my ignorance guys but you can run Koralias on Seio Controllers?? What I am reading says they will only run seio pumps, but then naturally they would say that.
Thanks
Tom.

[albert_dao]

Yup, you should have no problems running Koralia's on SEIO controllers. Lots of people in the States have done so ever since these things hit the market with no ill effect.

[digital-audiophile]

So do the controllers power them right off, or does it bring it down to where the impeller is hardly spinning. I ask becuase I have started to have a couple issues with my Korlia 4's when I turn off the flow for feeding when I turn the back on the don't always fire up right away, they either need a tap or to cycle to power a couple times to get them started. I had this issue with Seios and I hated them.

[Der_Iron_Chef]

They power them down, to my understanding.