![]() |
#11
|
||||
|
||||
![]() Im now tinking of adding two of those http://www.canreef.com/phpBB2/viewtopic.php?t=3510
on a mag18 and put all the plumbing and the mag on the top of the tank with only the intake of the mag inside the tank I will include a valve on the systeme to recharge the pump in water |
#12
|
|||||
|
|||||
![]() Quote:
__________________
Brad |
#13
|
|||||
|
|||||
![]() Brad, guess I read wrong. Never knew the pump was included in the kit. I was just reading info on a Tunze site. That is not to bad then. Actually when compared with other systems, its pretty good.
Stephane, agreed its in the tank. But unless its a problem with looking at it, I dont see another. I sure its more than safe, being a Tunze.
__________________
Doug |
#14
|
|||||
|
|||||
![]() Just an FYI, but I was talking to someone that got the 6110 kit for his 120g tank and felt he needed a second. If you decide to get one, I think J&L is going to have a waiting list. More demand than supply right now!!
__________________
Brad |
#15
|
|||||
|
|||||
![]() Ok, I went back to read somemore. I just assumed the kit came with the 6080, but I see its different.
Am I seeing wrong. It says 3175gph. :shock: :shock: :shock: Thats not enough for a 120. I lost something here. First reports say the 6080 @ 2250gph was to much for a 4ft. tank. I relize the 6110 can be controlled, but how is 3175gph not enough?
__________________
Doug |
#16
|
|||||
|
|||||
![]() I guess maybe he has it turned down abit, not sure. I think he's going to do a review after getting his second one!! I'm thinking rocks would be flying out of the tank with that much flow. :shock:
__________________
Brad |
#17
|
||||
|
||||
![]() Stephane:
You may be interested in this. http://pages.infinit.net/lambertv/pa...y_reef_rat.htm http://www.reefcentral.com/vbulletin...hreadid=139105 Quote:
__________________
-=Bryan=- |
#18
|
||||
|
||||
![]() Brad,
J&L is altready long out of stock, and yes I am am also waiting to hear a certain SPS keeper review ![]() Scott
__________________
Homepage |
#19
|
|||||
|
|||||
![]() Scott, the difficulty for me is deciding which I need. I like the price of the 6080 but the pulsing ability of the 6100 on the controller is also appealing. Now I can probably afford the 6110 kit or 2 6080 pumps. Having one pump in the tank opposed to 2 is better, and I have up to 6 MJ 1200 powerheads I can supplement with. SO which way to set this up is giving me a headache :?
Any thoughts on this? Although your tank is much bigger, what are your potential plans?
__________________
Brad |
#20
|
|||||
|
|||||
![]() Brad, how about 2 on timers? One hour current dis way and next hour current dat way.
![]() Sounds like it would work fine. I notice they have warnings about fish getting into the stream pump, when completely shut down. My stupid shrimp would be in there for sure. I likely some of my dufus chromis.
__________________
Doug |