Profilux II plus aquarium controller

[scoobyupnorth]

Hi Michael - Any idea how to change the channel back to blue? The LED lamp you mention is that the Profilux-Simu? Regards Paul

[Aqua-Digital]

Hi

Sounds like you may have moonphase set up, I am assuming you have a simuDB i.e it ony has a blue colour.

Other than moonphase or the simulation being set to cloudy days you will need to look at your set up graph. As there as so many setting for the simu's it is hard to diagnose by guess work, but if you can send me a copy of your profilux data file I can tehn upload it to mine and see where you are going wrong.

This can be done in file menu, you cn then save you settings to your pc and email them to me at sales@aqua-digital.com

Please give me 72 hours to look at it for you.

Not all the LED lights from profilux are simu's only the ones that flash, if you have a quick glance at my site you will see the difference as to what they do.

Regards
Michael

[Ginzo]

Can my PH and Temp probes be completly immersed ?

[Aqua-Digital]

Yes they can

Regards
Michael

[AquaCan]

Hello Matthias, I have local WLAN access now, thanks to the member "marsh" from the Reef Central forum for his assisstance.

Could you please explain how to go about setting up for a remote connection to the Profilux via the internet, for example, from another city, country, etc..

Many thanks...
LRS ( AquaCan )

[Matthias Gross]

AquaCan,

I am happy to hear that your WLAN card is finally working, thanks to Marsh!
For a remote connection you need a static IP from your provider or a dynamic DNS - (http://www.dyndns.com/).
Then you must set your router that incoming calls to Port 10001 are redirected to the WLAN-card.

After that you can access your ProfiLux from another location with ProfiLuxControl. Just enter there your DynDNS or static IP.

[LoneStar]

Ok first off I gotta say what a great product this is. I haven't purchased one yet but I really like the capabilities of it. I've been researching the Profilux II on CanReef and also on other forums. I still got a few questions, and I am still making a wish list of all the components I want to attach to the unit (e.g. tunze(s), LED(s), and whatnot).

My first question would be associated to the dimmable ballast option....more specifically dimming a t5 ballast. I have been reading as many websites as I can but haven't seen a whole lot of ballasts on the aquarium vendor sites that sell dimmable ballasts. A few pages back I found the link to the Sylvania ballast, the Sylvania 49673 QT2x54/120 PHO-DIM. I was just seeing what other brands there are that would run t5 high output lights that have the dimming option? I figured out how the unit works, but I'm sure there is more than 1 vendor that makes a ballast like that.

Also, does the circuit board that controlls the dimmable ballast come with a Profilux II? Or is it a accessory option that must be purchased seperatly? If so how much would that cost?

I guess it would help to say I'm located in the US.

Any help would be appreciated. I'm still making a shopping list of Profilux components I want and I'll post them here later to see how I would need to hook them up to the controller.

-Michael