![]() |
|
#1
|
|||||
|
|||||
![]() Why, what's the big deal? People a bit touchy about the price of BK's?
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#2
|
|||||
|
|||||
![]() I read they are coming out with a Recerc BM that will be External. Any truth to that rumor? If so I may have to start counting my Pennies
J |
#3
|
||||
|
||||
![]() The price is alot lower than a BK probably close to 1/3 of a BK.
As for the Recirc Models ,Jason I am not sure ,when that will materialize ,there will be a BM300 in the future which is going to be with 3 pumps. Also for the Air intake ,Albert it is actually 1000 LPH/Pump so in the BM-250 case we are talking 2000 LPH of Air Intake. Regards Jason
__________________
support@prolineaquatics.com |
#4
|
|||||
|
|||||
![]() BM 250 Well I have a chance I can get a BM2590 from a friend in the US, that i'm most likely going to get it. I was going to buy Dirty reefer's Deltec 701 from him ,but he doesnt want to sell it yet until he sells his lighting unit. Then I was going to buy the
h&S from blaster ,but again something came up. Now that i have some one buying my dual beckett and my other tank i can get another skimmer to try out. I have tried many different skimmers from Euroreef's ,down drafts ,becketts, venturi, Air stones. So i have been doing a bit of reading on the Bubble masters and yes they seem to be pretty good. they also say you need at least 200 gal to run these skimmers from the 200 model. I'm getting the 250 with the daul pumps and the gate valve. So I hope that my 120 gal with the 75 gal sump will be ok for the unit. can any one tell me what water height do you need for the skimmer are they like the euro reefs that you need around 9" of water or is it 6"
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. |
#5
|
||||
|
||||
![]() I am running mine in 7 inches, on a 150 gallon with a 50 gallon sump...very similar tank sizing, and it pulls out stuff like its going out of style....still works at 8, and 9 inches, but have not tried it lower.
Nate |
#6
|
|||||
|
|||||
![]() Quote:
__________________
Jason |