PVC Flex Tubing

[digital-audiophile]

I'll be using a rio 32HF internal pump and it has the option of the NPT thread off the pump or a hose barb. If using this spaflex would I need to use a female NPT tp PVC spiggot to fit this tubing? Then do you glue it with PVC primer/glue?

Thanks for all the help guys!

[Delphinus]

Think of spaflex as exactly the same as your rigid PVC, except that it bends. You wouldn't need a hose barb for it, just your regular PVC fittings.

Now, I have a Rio 32HF on my ritteri tank and I don't remember it having NPT thread option, I'll have to look at it again. I just used a 1' section of vinyl hose that slips over the output and then a hose barb and then into my return plumbing manifold. But if it does have the NPT option then you just need whatever adapter to fit into it. Either a MPT that threads right into it, or a FPT that the pump threads into, or you can use MPT with a close nipple if need be (might be the easier option if your using a bushing to step up the plumbing size, for example)..

[digital-audiophile]

Off the return on the pump there is a little slip adapter that fits in it that has an NPT thread on it, in the box there are two hose barb adapters, 3/4"/1" if I recall correctly that thread onto that small "nubbin" maybe I'll hit up western pump on Saturday with those pieces in hand to see what they suggest. I want to make it so I can easily disconnect the line from the pump as well so I can service it, without having to try to cut stuff apart to pull it out of the sump.


Maybe I'll snap a few pics when I get home tonight to illustrate what am trying to do.

[Quinster]

on all my plumbing I use at least a couple inches of Spa Flex on the inlet and outlet lines to help dampen vibrations, I also place either a union or a union valve for easy removal for cleaning.

[Delphinus]

A union like what Quinn has would work. I just don't remember anymore, but I could have done the vinyl tubing just because it's just as easy to remove if I need to clean the pump. But it doesn't slip off (or leak for that matter, not that it would matter much since it's in the sump) on its own, but it's just basically a low-tech alternative. If you ever want to pop by I could show you have I have it, shoot me a PM if you'd like to check it out. Or I could pop by and help you sometime...

[Canadbis]

I am using some of that braided flex tubing from Home Depot, and as stated by Tony, Heat it up and hold until cool. That is the only way to get the "perma bend" out of it. I have had no problems with leaks or kinks in it since I heated it. If I was to do it all again I would stick to the PVC solid tubing.
Next tank

[digital-audiophile]

Thanks again guys All the help really is appreciated.