how to frag frogspawn ?

howdy20012002 · #1 04-11-2007, 05:10 AM

I have fragged frogspawn by just snapping off the heads.
it all depends on how much room between there is.
some are much more compact than others.
HTH.
Neal

demon666 · #2 04-11-2007, 05:50 AM

me too the way neal does it

ponokareefer · #3 04-11-2007, 01:09 PM

I just brake them apart by hand as well. If the heads are too close together, I'm not sure how to do it though.

draco · #4 04-12-2007, 03:57 AM

Yes there is about 2 1/2" between heads so I will try to hand break them. Wish me luck !!!!

BCOrchidGuy · #5 04-12-2007, 04:14 AM

Okay, for clarity, don't put the dremel in the aquarium, you take the Frogspawn out, dry the skeleton a bit with a towel and then use the dremel to cut the skeleton.

Doug

kwirky · #6 04-12-2007, 03:57 PM

I've fragged my frogspawn by accident before. I think they're one of the easiest corals to frag.

vanreefer · #7 04-13-2007, 03:57 AM

side cutters as far away from the heads as possible as the skeleton is very brittle and will shear off pieces... or remove it from your tank and use a dremmel... it'll be fine out of the water for a few minutes, then just epoxy them on to a piece of rock and you're done.

It's really easy