Rio Nano-Skimmer

[Shrimpy]

Here is a manual I scanned. If you can't make it out let me know and I will rescan it with a better dpi.

I found the most important step is to set the venturi for a height of 1 5/8" from the lowest postion possible and then make small adjustments in height from there. Make sure to let it run a mininimum of 1 hour to see what kind of skimmate you get after a height adjustment of the venturi.

I too am using it to cure my new 10g tank. All I have is live rock and sand because it is still cycling. It pulled out some nice green tea colored skimmate for a day and now nothing which is normal seeing there is no real bioload yet.

[Midknight]

Originally Posted by Shrimpy

Here is a manual I scanned. If you can't make it out let me know and I will rescan it with a better dpi.

Will take it to work and see how it prints there and let you know.

And Thanks lots.

[andsoitgoes]

this might help too:

http://reefcentral.com/forums/showth...hreadid=968288

[04scoobysti]

Im still getting Mirco bubbles with this skimmer and i have been running it for 6 weeks or so. Just took it off the tank for a good cleaning and added a piece of sponge to the last chamber to try to cut down on the bubbles, still bubbles this morning. I may have to retire this thing soon and go with an aqua-c if i dont get this fixed. Any ideas?