|
|
|
|
|
#1
03-14-2007, 08:20 PM
|
|||||
|
|||||
One of the problems is that I am lilited by space. I am getting a 90g and have one of the AGA black vynl stands, the door on the front is olny about 18x18 so it is a tight fit. If I can find something maybe a little longer I could try to get it in the stand from the top, allthough there are cross braces on the stand limiting that. I was able to squeeze a rubbermaid container in the bottom due to the flexibility but I'm not sure if that is a good longterm solution. The other option I have is to place the sump outside the stand and then box it in after, the issue there is the hole is on the left side and the place where the tank needs to go would put the sump on the right and give about 6' of travel from the return pump back to the tank.
I can take pictures later if this helps?
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2 
|
|
#2
03-14-2007, 08:34 PM
|
|||||
|
|||||
|
I guess i have a lighting question too.. Have a PFO pendant with 2x24W Actinitcs and a 250W mogul MH that I plan to hang on the tank, do you think I will get enough light spread to cover the 48" tank?
__________________
- Greg 90G : Light - Tek 6xT5 | Skim - EuroReef RS135 | Flow - 2xVortech MP40W | Control - Reef Keeper 2
|
Hybrid Mode
