Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Tank Journal

Reply
 
Thread Tools Display Modes
  #1  
Old 03-09-2007, 04:00 AM
PoonTang's Avatar
PoonTang PoonTang is offline
Member
 
Join Date: Mar 2007
Location: Ladysmith BC
Posts: 1,071
PoonTang is on a distinguished road
Default

Quote:
Originally Posted by Rikotek View Post
Well, the tank has been cycling for about a week now, I decided to take my first batch of measurements to see how things are progressing.

Temperature: 76

Salinity: 1.025 (added some water just now, trying to get it back to 1.023)

pH: 7.5 - I am told that my pH should always be above 8.1 I don't know yet if this is something remedied by the cycling process or if there is some sort of pH adjustment chemical/proceedure I need to use. If anyone knows that would be great!

Ammonia - 0.04 - Looks safe to me. I figured there would be more Ammonia this early in the cycle process but I guess it's going along better than I thought.

Nitrite - 0.0

All in all it looks like the cycling is going well but it is going to take a while longer before I begin to introduce any livestock or anything like that. Picking up some more rock from a coworker who got out of the hobby a while back. I will work on adding that and aquascaping until all of my levels read safe.

-Eric
Your ammonia reading will of course read really low because you have nothing that ads ammonia to your tank. You need to add ammonia to your tank to get your cycle started. Also your going to need atleast 1.5 pounds/Gal of LR for your tank. Tank will not be anywhere cycled after 1 week, this is going to take about 2 months. Dont worry about your algea outbreaks, they will come and go naturally as your tank progesses through the cycle.
Reply With Quote
  #2  
Old 03-21-2007, 06:32 PM
Rikotek Rikotek is offline
Junior Member
 
Join Date: Jan 2007
Location: Alaska
Posts: 13
Rikotek is on a distinguished road
Default Dodged A Bullet / Question

I dodged a bullet yesterday with regards to a protein skimmer purchase.
I don't really need it yet but I have the budget for a cheap one so I figured I would get it out of the way.

I didn't do too much research as this was sort of an impulse buy online while at work but I put in an order for a Seaclone 100. I deciding, after I had placed my order *dumb*, to see what others thought of this model and the results were frightening. Luckily I was able to cancel the order before it shipped.

Does anyone know of a good, preferrably cheap, protien skimmer that I can 'set and forget' somewhat? I was looking at a couple of the AquaC Remora's that everyone seems to like but they are a fair amount more expensive. I will go with it if I have to but that may mean putting it off for a while.
Reply With Quote
  #3  
Old 03-21-2007, 06:53 PM
Dragonsteeth Dragonsteeth is offline
Junior Member
 
Join Date: Mar 2007
Location: North Vancouver, BC
Posts: 21
Dragonsteeth is on a distinguished road
Default

When i set up i used a Lee's in tank protein skimmer (needs air pump) for cheapness. It worked fine and did the job. I only upgraded it after 3 years to take my tank to the next level.
If you lived nearer you could have mine.
I only have a 33G tank so i dont know if you can find one for bigger but it might get you going.
Also, better to bite the bullet and get all your uncured live rock in there now so that when the cycle is done you are ready to go. Otherwise you will have to add cured rock at more expense each time unless you add one small piece of uncured each time.
This is the limit of my experience. More experienced auarists could give you better advice.
Reply With Quote
  #4  
Old 03-29-2007, 03:57 PM
Rikotek Rikotek is offline
Junior Member
 
Join Date: Jan 2007
Location: Alaska
Posts: 13
Rikotek is on a distinguished road
Default

You know, I never even thought about an in tank model skimmer. When I mentioned it to some people over at Big Al's they said that they frequently get a lot of returns on those. I always take their advice with a grain of salt however as some of it has proven to be good but a lot seems to be just very strong personal preference.

I will look and see if I can find an in-tank unit that would work for 90g. That would be preferable as I do not have a sump (yet), and, when I set up my tank, I don't believe I left enough clearance for a HOB model (I only have about 3" from the wall live and learn I suppose)
Reply With Quote
  #5  
Old 03-29-2007, 06:21 PM
woodcarver's Avatar
woodcarver woodcarver is offline
Member
 
Join Date: Apr 2005
Location: MILL BAY
Posts: 164
woodcarver is on a distinguished road
Default

keep the log going! Very interesting for us newbies
Reply With Quote
  #6  
Old 03-30-2007, 03:26 PM
Rikotek Rikotek is offline
Junior Member
 
Join Date: Jan 2007
Location: Alaska
Posts: 13
Rikotek is on a distinguished road
Default Picture Update!

So last night was a big day, I bought a Remora HOB protien skimmer (it just barely fits behind my tank, damn me and my poor planning). I rinsed it with hot water to reduce the break in period and already it is generating a bit of foam and a tad bit of tea colored water.

Figured this called for a photo update. I swear that one day I will buy a camera to replace my broken one, but for now, its cell phone pictures :|



Haven't done a livestock update post yet, so here is whats in the tank. I don't plan on adding much else for a little while. I am going to let the tank age (and my wallet replenish) for a bit.

4 Clowns
10 Turbo Snails
10 Hermit Crabs
1 Zoo Frag

I put a sofa near the tank and it has become my favorite reading area in the house. I find the sound of the water to be very relaxing and I can just stare into the tank for hours. I can only imagine the effect it will have when it is fully matured with lots of healthy fish and corals
Reply With Quote
  #7  
Old 03-30-2007, 03:41 PM
michika's Avatar
michika michika is offline
Member
 
Join Date: Nov 2004
Location: YYC
Posts: 5,063
michika is on a distinguished road
Default

Looking good!
__________________
+.-.+.-.+.-.+.-.+.-.+.-.+
I glue animals to rocks
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 12:56 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.