|
|
|
#11
03-06-2007, 04:13 PM
|
|||||
|
|||||
I'm in
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. 
|
|
#12
03-06-2007, 04:55 PM
|
|||||
|
|||||
|
I ordered some. I tried to do the free sample thing but got frustrated trying to figure out which of the 20 product #'s for Enkamat to request, so I figured what the heck, for $30 I'll just have loads extra.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
|
#13
03-06-2007, 10:01 PM
|
|||||
|
|||||
|
well then.....
well if thats the case Tony, $28 doesn't seem that bad. I'll throw $10 into the pot. a couple more people and you can split that 2 yards into 1/2 yard each (or however much you decide to part it)
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up.
|
|
#14
03-07-2007, 05:08 AM
|
|||||
|
|||||
|
Cool
 I'll msg you guys when the stuff comes. I picked the cheapest method of shipping (of course) so I imagine it will be at least a week or two before it's here.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
|
|
#16
03-07-2007, 02:39 PM
|
|||||
|
|||||
|
Quote:
 ), I just crammed the enkamat over top of the needles. I put a couple layers of what I had (a different/wrong type of enkamat) and it still made a pretty marked difference over just the needlewheel alone which makes me want to try the proper mesh.
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
|
|
#18
03-07-2007, 03:08 PM
|
|||||
|
|||||
|
Well I'm not sure what type it was, I bought it from BigAls as a Tetra Pond Filter (it was only $7.99) but when it arrived it looked much different from any of the posts showing the stuff in that RC thread. Its like a "tight" mesh on the bottom and very thin, say 2mm thick, then it has all these little offshoots that loop upwards to make it "thicker" yet it wouldn't really provide much in the way of "mesh" for what we're looking for. So I cut the offshoots off and just used the bottom layer. I put two layers on, but I think that the PF4 Enkamat, being thicker, would do a better job as we could get away with just two layers of that, but this stuff I have probably needs about 6 layers or so to be truly efficient (and its a huge PITA to get it on over the needles on the impeller
 ).
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
|
|
#20
03-07-2007, 03:28 PM
|
|||||
|
|||||
|
Hey tony if you have any left over from what you have bought I will buy some off you.....any good DIY'er has to have everything possible lieing around!!
__________________
500G Mixed Reef  __________________________________ Electrician, Electronics Technician, I can help with any electrical questions you might have!! __________________________________ Kevin
|
Linear Mode
