attn: BC 29 owners

krish · #1 02-21-2007, 10:19 PM

I've just set up my BC 29 and it appears to be leakless, which is a good start. Now I just have to take out the bioballs and decide what to do with the filter compartments. Then it's time to make salt water.

I'm assuming someone else here must have one of these considering how quickly they seem to sell.

Does anyone here have any advice for someone just getting started with one?

i have crabs · #2 02-22-2007, 12:15 AM

throw away the carbon/floss cartridge, mine got dirty and started backing up the water in the tank after 2-3 days, i also put a slowdown valve on the return line

krish · #3 02-22-2007, 03:50 AM

Sounds like a good idea.

Should I have some charcoal in there though? I didn't use it in my fw tanks, but it seems I've read that people use it in their nanos.

Chaloupa · #4 02-22-2007, 05:40 AM

I filled up the 2nd chamber on my BC14 with live rock rubble and pieces, took out the floss and charcoal, cut a piece of filter floss to fit the tray above the live rock rubble that I take out and clean every couple of days, but the stuff is so cheap you can buy it and make sooo many out of one package, our next mod is to use a locline fitting so we can split the return in 2 directions, and possibly to change the pump for a bit larger....but there is SO many things you can mod on these tanks, ie scrape off the paint from the back, put a light at the back and turn the 2nd chamber into a fuge......there is another "nano" site that has soooo many threads on mods for thesse. It's pretty cool! Of course, we can't just buy and it and leave it alone...we all want to make it BETTER

i have crabs · #5 02-22-2007, 01:38 PM

aquaclear 110 carbon fits right in the chamber where the bio balls are, i took out half the bioballs and put in floss and a carbon on top of the bio balls and put a piece of floss on top of the tray above the bioballs to quiet it down a bit,and i also put a sponge in where the carbon cartridge was.
im concidering building 2 closed loops with some mj1200's and buying a inline heater so i can hide everything in the back,right now i have a seio820 and a ebojagger heater taking up valuable property

krish · #6 02-22-2007, 03:41 PM

I cut the center out of the grate in the first chamber and put my heater in there. It's a Stealth 150w and it fits perfectly.

The back of mine just feels like glass so I didn't try scraping off the paint on the back. Should I give it a try anyway?

Another question: sand or no sand? I know there's a whole section on here devoted to that question. I'll read up on that as I can. In the meantime, what do you do?