|
|
|
|
|
#2
02-08-2007, 06:07 AM
|
|||||
|
|||||
12 hours later
OK here are the pics 12 hours later.
  I personally don't see much of a difference. Mind you the bubbles were already pretty small to start of with even prior to the modification. I would like for somebody who's using a mak4 on a beckett skimmer to try the same mod.
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. 
|
|
#3
02-08-2007, 06:57 PM
|
|||||
|
|||||
|
reply
Chin, your bubbles were a lot smaller to start with than most Beckets I've seen. I can't see much of a difference either.
Maybe there is a threshold to how small bubbles can get, and your skimmer had already achieved it. I'd still be interested to see other peoples results with this mod.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041
|
|
#4
02-16-2007, 06:50 AM
|
|||||
|
|||||
|
Definite pro to this modification
Its been just over a week since I've done this mod and the bubble sizes have not changed.
BUT I want to mention that I have not had to clean my skimmer since ....... OK not completely true cuz i had to squirt water in the collection cup so i could see the foam on top. But I haven't had to remove the top riser to clean it out because once I had set the air valve to achieve the foam level to spurt over the top, i have not had the air valve clog up on me since. Without any change to the bubble sizes that I can visually observe, I will still recommend this modification to beckett owners because it didn't decrease the performance any and for me, i had not have to clean the skimmer for a week. I'll post the next time i do have to clean the skimmer riser.
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up.
|
|
#5
02-18-2007, 11:19 PM
|
||||
|
||||
|
Ct part number
i have 2 of these fountain heads still in box (no more available in Sask i got em)
part is discontinued but if you ask they will go find for you in back stock) last time i looked on their computer Alberta had a few left!! Wetlands fountain head "foamjet" 59-7755-4 good luck on finding them.. now i need a good skimmer to try on!! Price was $9.00 as is discontinued Last edited by Cazoom; 02-18-2007 at 11:24 PM.
|
|
#6
02-21-2007, 01:37 AM
|
|||||
|
|||||
|
I wonder if they are able to order them still??? as in like a Special Order
__________________
500G Mixed Reef  __________________________________ Electrician, Electronics Technician, I can help with any electrical questions you might have!! __________________________________ Kevin
|
|
#7
02-21-2007, 01:41 AM
|
|||||
|
|||||
|
for sale
I have about 4-5 beckeet injectors in my pile of DIY material if anybody's interested in them. PM if interested.
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up.
|
Hybrid Mode
