first time fragger needs advice

[Farrmanchu]

That looks good, you've jumped in with both feet! The cut on the mother is accessable in case there's a problem. The frags look nice, are those plugs they're on? Did you glue them? I've found that most softies kinda reject the glue after a while, but are usually attached to the plug beside the glue, by the time the glue stops sticking. So, be carefull not to blow them of the plugs with flow, as they may loosen up in the next few days.

[kwirky]

Originally Posted by Farrmanchu

That looks good, you've jumped in with both feet! The cut on the mother is accessable in case there's a problem. The frags look nice, are those plugs they're on? Did you glue them? I've found that most softies kinda reject the glue after a while, but are usually attached to the plug beside the glue, by the time the glue stops sticking. So, be carefull not to blow them of the plugs with flow, as they may loosen up in the next few days.

they're fastened down on the plugs with fishing wire. Albert_dao showed me the technique. the plugs have little holes in them to feed the line through. They're strapped on the plugs very firmly.

I was more worried about getting good clean cuts, than anything. The branches were too bunched up to use scissors, and I even had a hard time with the scalpal.

Not bad, though, i think for a first timer