![]() |
|
#1
|
||||
|
||||
![]() Quote:
I may be wrong here but I would think a sump tank would be a better investment than a cannister filter. Your live rock is going to act as your bio filter and your sump could have a filter sock in it to catch you debris (optional). You could then use a decent return pump to give you a higher turn over rate and better circulation. You will also be increasing your total water volume by adding a sump as well. You should try to find the specs on the protein skimmer too so we can see if it will be large enough for your system. Most are over rated by the manufacturer. |
#2
|
|||||
|
|||||
![]() I've used this tank in the past for freshwater so I already have the tank (not drilled) and the cannister filter. I know a sump would work best but unfortunately I don't have the $$$ to get a new tank atm.
For the protein skimmer I don't have one yet but will purchase one from my LFS when ready. I need a hang-off-back type. |
#3
|
|||||
|
|||||
![]() IMO, the rock will get the job done. The canister filter will have to be maintained with a fairly strict cleaning schedule as they are nitrate factories (although good for running carbon and water polishing on a short term basis).
Oh ya and Welcome to Canreef! ![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. Last edited by christyf5; 01-22-2007 at 08:06 PM. |
#4
|
|||||
|
|||||
![]() Welcome to Canreef Kevin!!
|
#5
|
|||||
|
|||||
![]() my first tank was run with can filter. took everything out and added only carbon. worked good. for water flow add some powerheads.
|
#6
|
|||||
|
|||||
![]() Hey Kevin...welcome
![]() First thing I recommend, especially since you mention you're on a budget, is to wait for things to sell here instead of going out and paying full price at a store. Skimmers and live rock pop up for sale here semi-regularly, so you just have to keep your eyes peeled! Regarding the canister filter...I have been running one on my tank with only carbon and a phosphate-binding media (Rowaphos or Phosar). Recently I've disconnected it, though, because as Christy stated, it requires fairly strict maintenance/cleaning, and I wasn't able to do so. I'm looking into integrating a sump and am collecting the parts to do so slowly. If I had to do it over again....or if I were you....I would just get the tank drilled right now while you don't have anything in it. I'm sure there are even people here in Calgary who would be willing to help you do that, etc., including the plumbing. Anyway...keep researching and don't rush. And again, welcome! |