Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Tank Journal

Reply
 
Thread Tools Display Modes
  #1  
Old 11-24-2006, 02:37 PM
reefsurfer reefsurfer is offline
Junior Member
 
Join Date: Jan 2005
Location: Tofino, BC
Posts: 12
reefsurfer is on a distinguished road
Default

Dale, just to give you a heads up. Certain types of pacific anemones have zooxanthela which feed the anemone through photosinthesis especialy the ones found in the shalow tide pools. Surely they can tolerate many less sunny days than their tropical relatives but might require the same intensity of light just not as often. I would think your different types of algea will require the same intensity of light, again, perhaps not 8 hours a day year round but SOME intence light.

I like your skimmer. thinking about building one like it. How is it woking for you?

I cant wait to see the surge tanks and how all of that functions. Ive always dreamed of doing something like that.

Keep up the good work.
Reply With Quote
  #2  
Old 11-25-2006, 02:00 AM
SeaHorse_Fanatic SeaHorse_Fanatic is offline
Gold Member
 
Join Date: Oct 2004
Location: Burnaby
Posts: 4,880
SeaHorse_Fanatic will become famous soon enough
Default

Dale,

I will be selling my 50g sump tank in a week or two. It's 48" long by 12" wide by 20" tall. PM me if you're interested, since you were asking for one in one of your posts.

BTW, what size is your current sump tank? Maybe we can just do a straight swap. Mine has single baffle installed already.

Anthony
Reply With Quote
  #3  
Old 11-28-2006, 05:15 AM
Dale's Avatar
Dale Dale is offline
Member
 
Join Date: Jun 2006
Location: Abbotsford, BC.
Posts: 189
Dale is on a distinguished road
Default

Well, my substrate experiment just keeps getting better (not).
Apparently the "green diamond" grit isn't a granitic based substrate at all but Nickel slag!!! Argghhh. A quick check on the www.targetproducts.com website (which I should have done if it hadn't flown under the radar on me) tells me I have a metal based substrate with low to moderate toxicity to fish. It took me by surprise as I never thought that slag would look like that.
So... don't buy that stuff

Last edited by Dale; 11-28-2006 at 05:24 AM.
Reply With Quote
  #4  
Old 11-28-2006, 05:52 AM
Delphinus's Avatar
Delphinus Delphinus is offline
Member
 
Join Date: Dec 2001
Location: Calgary
Posts: 12,896
Delphinus has a spectacular aura aboutDelphinus has a spectacular aura aboutDelphinus has a spectacular aura about
Send a message via MSN to Delphinus
Default

Bummer.. it looked so good. Oh well, on the bright side, at least you found out now and not the hard way!!

I've got to ask though .. why not just use the real thing? Couldn't you just go to a beach somewhere and dig up a couple buckets worth? Or is there a reason that won't work? (Has to be probably the most economical thing though??)
__________________
-- Tony
My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee!
Reply With Quote
  #5  
Old 05-16-2008, 02:56 AM
Dale's Avatar
Dale Dale is offline
Member
 
Join Date: Jun 2006
Location: Abbotsford, BC.
Posts: 189
Dale is on a distinguished road
Default

Well, that took a little while (June 2006 - May 2008)

Here's a shot of the tank now



Hum... It's no longer a 135G. tank. That tank was moved to the rear of the fishroom and now houses my school of freshwater sunfish. In its place I've installed a 75G. display serviced by a 100G. sump.

Here's a schematic of the sump set up:



The one change is #12 listed as a closed loop feed. The surge from the CSD was a little too much so I had to plumb that line as an additional drain into the sump.

and a shot inside the fishroom:



Everything is a little rough right now. As I decide that each system is working as wanted I will tidy things up (even though, as a hobo reef, the decor could be called "shabby chic"

Here's a shot of my return pump; a modified AC 110 powerfilter. Two of my goals were to reduce power consumption as a whole and to reduce heat inputs into the system (mainly removing submersible pumps that heat the surrounding water). By mounting the sump 10" lower that the display I could use the AC 110 filter as a return. It runs on 14 watts and the pump is external.


Last edited by Dale; 05-16-2008 at 05:12 AM.
Reply With Quote
  #6  
Old 05-16-2008, 04:32 AM
Dale's Avatar
Dale Dale is offline
Member
 
Join Date: Jun 2006
Location: Abbotsford, BC.
Posts: 189
Dale is on a distinguished road
Default

Here's the CSD (Carleson surge device). It's basically a three gallon bucket with three bulkheads. One for the surge line, one for the feed line and one for an emergency drain line.



It, the chiller and eventually the skimmer (not the current skimmer) are fed by this externally mounted pump (Pondmaster 250)



Here's a shot of the refugium portion of the sump. It is lit by a Coralife CF unit sitting on the wide center brace. Some additional flow is provided by a small Hydor powerhead with a rotating head. The refugium currently houses three Pacific green burrowing anenomes and a tuft of Macroalgae. There is about 150 lb's of LR in the sump and display and I have used some pieces to make a bridge in and out of the refugium for hermits and other dentrifores. The blue bottle is just being used to trap out some rock pricklebacks that have been attacking the anenomes.



Here's what a prickleback looks like:



They are amazingly curious fish that can last 17 -23 Hr's out of water but they are savages. I originally trapped them out of the display (and put them in the sump) after they began attacking my sun star and now I must trap them out of the sump as well. It's back to the quarentine tank for them!

Here's a shot of a burrowing anenome



and what it looks like when it's had enough


Last edited by Dale; 05-16-2008 at 04:48 AM.
Reply With Quote
  #7  
Old 05-16-2008, 04:46 AM
mark's Avatar
mark mark is offline
Member
 
Join Date: Nov 2002
Location: Edmonton AB
Posts: 4,212
mark is on a distinguished road
Default

Great for the update.

For your CSD, how's it for putting bubbles in the display?
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 11:55 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.