Euroreef Sponge Bubble Difuser - Don't use as Prescribed

[Pescador]

The gate valve mod just replaces the riser tube, you shouldn't have to drill anything.

[Chaloupa]

Can you post a pic of the mod? I have a Euroreef also and dislike using the sponge too....if you do that would be great!

[Johnny Reefer]

I'm interested in this too. I'll be setting up two EuroReef RS 250's soon.
If the gate valve mod is the way to go, now's the time to do it.
What parts are needed?
Where can one get them?
Is it simple to do?

Thanx much,

[kwirky]

actually I did some research, and I got the gatevalve mod mixed up with the recirculation mod.
looks pretty simple. you find a gate valve the same size as the riser tubing (or close), and attach it where the riser tube would have gone. then attach a T, then feed the output back into the sump for a quiet output. Looks WAY easier to dial in than raising and lowering that riser tube.

i found an image of it on thereeftank.com


I think this is a recirculating model, too

[support@proline]

Thanks for the picture Sean
the Gate valve mod kit prepared by Euro-Reef is available from any Euro-Reef Dealer ,All the pieces you need is in the package just put it together ,It does make life easier

[Dave C]

I did the gate valve mod but used a ball valve instead. They're much cheaper, but more importantly, easier to find. I know a ball valve isn't appropriate for the task of fine tuning but once you dial it in you never change it & it works great. No drilling, no gluing necessary for this mod and very cheap if you just buy a bit of pipe & a ball valve.

[Pescador]

I bought the kit for the first one, saw the pieces and got the parts for the second one at Western Pump. I used a sliding gate valve like this. The adjustment isn't as fine but it was cheaper and available. A 1 1/2" elbow and Tee a couple pieces of pipe your done.

[kwirky]

i've got a "connection" with a plumbing wholesaler, so I can get the spears gate valves for a great price.

my mom's the accountant there lol. I think I'll add it to the christmas list.

[Johnny Reefer]

Originally Posted by kwirky

actually I did some research, and I got the gatevalve mod mixed up with the recirculation mod.
looks pretty simple. you find a gate valve the same size as the riser tubing (or close), and attach it where the riser tube would have gone. then attach a T, then feed the output back into the sump for a quiet output. Looks WAY easier to dial in than raising and lowering that riser tube.

i found an image of it on thereeftank.com


I think this is a recirculating model, too

Where'd the picture go? It was a good reference.

Cheers,

[Pescador]

Here's a link to the ASM site with pic's.
http://www.asmskimmer.com/mod1.htm