![]() |
|
#1
|
||||
|
||||
![]() I think I am starting to get some red cyano bacteria forming on the sand. I physically removed it (as it kind of sticks the sand together to for a red skin), but after about 10 hours, it comes back. What causes this? I assume this is not a good thing. I started getting this after feeding mysis more often. Maybe I am overfeeding.
As well, I have noticed that I have quite a bit of red stuff growing a couple cm under the sand along the front side of the glass. Should I dig it up and try to remove it, or should I just leave it. Thanks Steve |
#2
|
|||||
|
|||||
![]() Quote:
![]() Quote:
![]() Thanks Steve[/quote]
__________________
Bob ----------------------------------------------------- To be loved you have to be nice to people every day - To be hated you don't have to do squat. ---------Homer Simpson-------- |
#3
|
|||||
|
|||||
![]() I'm starting to get a bit of it too. That's why I'm looking for conches.
|
#4
|
|||||
|
|||||
![]() I have 2 fighting conch (got them from sea care) and they make short work of Cyno, about 1/3 of my sand bed was solid cyno a 10 days ago now less than 10% off the cyno is left..
I have found that heavy feeding alond with reduced skimmer efficiency (I for got to clean it one week ![]() Just my observations Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#5
|
||||
|
||||
![]() I also have some brown golden algea forming on the live rocks.
|
#6
|
|||||
|
|||||
![]() I've fought long and hard with this nuisance algae as well. I've just recently taken control. I believe the addition of a skimmer to the system was the greatest benefit but I've also began to use "Phosguard", by SeaChem. I "slow-flow" all make-up and replacement water through a homemade "cylinder" in addition to GAC cartridges. (the poor mans RO/DI). I haven't tested for phosphates or silicates but with no cyano. visible, I believe it's working.
|