Standpipe Problems

albert_dao · #1 09-06-2006, 03:16 AM

I found the easiest way to dial the standpipe is to drill a large hole for the air intake and putting a valve on that.

If that didn't work for you, then.... you're out of luck?

Coderad · #2 09-06-2006, 03:24 AM

If you are talking in a overflow box. I use a straw and put it an inch or 2 down the tube, you could use an air hose. The slurping sound is the pipe sucking the air down.

albert_dao · #3 09-06-2006, 03:43 AM

Okay, CHECK IT OUT - I spent a lot of time on this, hope it clarifies things: