using Ozone

Skimmerking · #1 08-31-2006, 12:09 AM

Tang man thanks I was looking for that answer, Doug and Harvey was stirring me in the right direction. But I just needed another opinion. My ORP is sitting at 375 Just to let ya know .....

Mike

Tangman · #2 08-31-2006, 12:14 AM

Ya I know, that already a great OPR reading!

wetcoast · #3 08-31-2006, 02:20 PM

Make sure you clean your probe regularly - I noticed my ORP values go higher and higher without cleaning my probe. I found a wire brush and vinegar helped it out nicely. After the cleaning I noticed my ORP which was once 375 was now 279!

mr_alberta · #4 08-31-2006, 03:15 PM

Make sure to clean your probe once a month to ensure accuracy of it. Plus with your water volume, a 25mg/hr dose really isn't anything to be overly concerned about.

Quinster · #5 08-31-2006, 07:30 PM

Quote:

Originally Posted by daveatwinterpegca

Make sure you clean your probe regularly - I noticed my ORP values go higher and higher without cleaning my probe. I found a wire brush and vinegar helped it out nicely. After the cleaning I noticed my ORP which was once 375 was now 279!

I use a toothbrush...but ya same idea

Skimmerking · #6 08-31-2006, 08:54 PM

So Harvey how much should I be dialing in any ways my orp is kicking around 380- 390 now with 35MG /hr

mr_alberta · #7 09-01-2006, 12:14 AM

Set a value, wait a bit and look at your orp. See if those values are being maintained where you want them to be and adjust as neccessary if needed. Its basically like dialing in a calcium reactor.

Skimmerking · #8 09-01-2006, 06:54 PM

well Just an update the ozone has been staying steady at 385 where i have set it and for get it man its nice to have the controller to take care of all the pre setting and farting around.

life is good .now i need more corals