|
|
|
|
|
#1
08-18-2006, 09:26 AM
|
|||||
|
|||||
Albert.... thats the most ballin thing I've seen in my life! Haha.
I agree with Albert, should keep it going! Im not sure if that will have enough strength to refill the pipe though?
__________________
No more tanks  - Laying off the ReefCrack for awhile!Cheers, Chris 
|
|
#2
08-18-2006, 01:19 PM
|
||||
|
||||
|
It stays primed through all the shut downs and startup. That part works great. The only time it is hard to start up is if I actually take it out and empty the tubes completely. The tube might help the big gurgle every 3 minutes though.
Thanks Glenn
|
|
#3
08-25-2006, 02:59 PM
|
||||
|
||||
|
If you take the cap off of the standpipe and have a valve upstream of the pump, then since the standpipe is higher than the overflow you could take a bucket of tank water and pour it into the standpipe when you wanted to prime it. Then turn on your pump and open the valve and off you go.
|
|
#4
08-25-2006, 03:39 PM
|
|||||
|
|||||
|
How deep is the overflow pipe in your sump. It should only be 1 or 2 inches from the water level. I had the same gurgling problem when I set my tank up.
__________________
M2CW
|
Hybrid Mode
