Movin' on up

albert_dao · #1 08-18-2006, 03:03 AM

I've done it. No problems. Just don't use primer. Primer melts ABS right quick.

Squiddy · #2 08-18-2006, 05:30 AM

You can't use the normal PVC glue either I don't think.

RobbAdams · #3 08-18-2006, 11:49 PM

OK Here is the first picture of something, this is the return line and is my first time working with PVC alos shown is part of the drain line. I can't finish until I get the tank for my sump from Keith (Wink, Wink, Nudge , Nudge).

I wish I kinew how to use my camera, this makes my tank look like an algae farm, the water does not look like this at all?

and here is my CBB

Robb

RobbAdams · #4 08-20-2006, 05:41 AM

How do i build a durso for a 1.5 inch drain in my CPR. I have read that you need to use a larger pipe diameter, however I thing the next size up is 2". I don't think it would all fit inside. The gurgling noise is going to make my wife crazy Help.

Robb

RobbAdams · #5 08-30-2006, 12:10 AM

well I think things are finaly almost finished after only 30 days I think I am close. I am still working on a lighting upgrade as I only was runing a single 175 MH over my old rig. and I need to build a proper canopy. Still wondering on the logistics of building a durso for a 1.5 inch drain. Will post some updated Pics Later tonight

midgetwaiter · #6 08-30-2006, 12:24 AM

Try a stockman style standpipe instead.

RobbAdams · #7 08-30-2006, 04:18 AM

Here are some pics of the setup as promised.

Full Tank shot:

Sump Beside Tank:

Current Ghetto lighting setup with halide only on one side of tank