Chiller Died - What to do now?

[Aquattro]

mine took a while to drop down, but it does now stay at 79

[Jaws]

When I left the house this morning, it was starting to drop slowly. I placed a cold air fan right in the front and another fan behind it to dispose of the hot air like you said. It seemed to be working. What is it that I'll need to replace?

[Aquattro]

Originally Posted by Jaws

What is it that I'll need to replace?

The motor for the fan needs to be replaced, $45 +s/h.

[Jaws]

When do you want to place the order? ASAP?

[Robw]

I have a pacific coast chiller 1/10hp (should have gone bigger). The fan started to make noise and I discovered that a cheap white fan from walmart had the same type of motor. Shaft size, mounting holes etc were all the same. Don't have the model number of the fan but it was a two speed, small 6-8" clip on type fan. I used the high speed winding. It has been working fine for about 9 months now. Might be worth a look. Hope this helps.

Rob

[StirCrazy]

Originally Posted by Robw

I have a pacific coast chiller 1/10hp (should have gone bigger). The fan started to make noise and I discovered that a cheap white fan from walmart had the same type of motor. Shaft size, mounting holes etc were all the same. Don't have the model number of the fan but it was a two speed, small 6-8" clip on type fan. I used the high speed winding. It has been working fine for about 9 months now. Might be worth a look. Hope this helps.

Rob

If you can remember what fan that was or if you see it next time you are in wallmart and can grab the part number that would be cool.

Steve

[Robw]

The one I ripped apart had the rotary switch on the back. I have a similar one that is a desktop type fan. Brand is "Super" model # 6dt, made in china.

Rob