Is this a problem? slanted tank...

niloc16 · #1 07-27-2006, 01:00 AM

definitely get it level. i'd say just go to rona or home depot and tell them exactly your situation and they will have good ideas

krisalexander · #2 07-27-2006, 01:09 AM

I would also reccomend if u choose to shim it..get some foam and cut it the size of your tanks bottom and set it on the foam this will ease any pressure points and will also help balancing.

kris

midgetwaiter · #3 07-27-2006, 02:05 AM

My apartment is the same way, in some places I have a noticeable change in slope over the length of the tanks as well. That's really bad news. Definitely shim the stand so it sits level.

Dale · #4 07-27-2006, 02:59 AM

Hi Genix,

The best fix is to shim the desk, at floor level. This gives the tank the full flat surface of the desk so there won't be stress points on the glass. As others have suggested, wooden shims from the hardware store will do the job. I have also shimmed tanks by cutting decreasingly shorter strips of corrugated cardboard and stacking them one on top of the other to act as shims. You have to allow for some compression but not really that much, actually.
________
silver surfer reviews

Buccaneer · #5 07-27-2006, 03:20 AM

Shim the desk at floor level and put 1/2 " foam under the tank

Rikko · #6 07-27-2006, 03:28 AM

Quote:

Originally Posted by krisalexander

I would also reccomend if u choose to shim it..get some foam and cut it the size of your tanks bottom and set it on the foam this will ease any pressure points and will also help balancing.

kris

Bump what Kris said - this is a good strategy for pretty well any tank. Shim the stand, of course, but do this after the fact to makes things "perfecter". Plus, as the hours droops over time or the stand settles/collapses, the foam will compensate and keep everything level.