![]() |
|
#1
|
|||||
|
|||||
![]() That is where I found out about the 1500 and 2600gph Seio's, I had only heard of the 3 smaller models before that.
Maybe they can make it a 4th of July sale. ![]() |
#2
|
|||||
|
|||||
![]() I have 2 Seio 1500's and 2 Tunze 6100's in my 135... The Seio's are nice and I've been very pleased with their flow and reliability... (I have my Seio's staggered to turn on and off only once per day, buried in the rocks to provide flow along the back wall and through the rockwork)... but man, if you want REAL flow... and realistic water movement... go with the Tunze... I was skeptical at first, and holy crap did it hurt my wallet, but the first one made me immediately go out and buy a second one... nothing else I have seen moves the water like this...
![]()
__________________
135G Mixed Reef. Bullet 2, 25 gal refugium, 2 X250W MH + 4X 96W PC\'s, DIY Calcium Reactor, Coralife 1/6 HP Chiller, Phosban, Tunze, 2 closed loops & SQWD\'s, Seios, Coralife 4 stage RO/DI & a bunch of other expensive gadgets... I may never retire, but I'm gonnahavahelluvanaquarium! Last edited by reeferaddict; 07-04-2006 at 07:04 PM. |
#3
|
|||||
|
|||||
![]() Great info, exactly what I was looking for, thanks.
Would a single 6100 do the trick, or would I need two of those? Do you use a controller on your 6100s? |
#4
|
|||||
|
|||||
![]() For cheaper than 2x6100s, I could get the wavebox, and I have seen the flow from these, very impressive.
Has anyone compared 2x6100s on a controller vs. a wavebox? |
#5
|
|||||
|
|||||
![]() Quote:
![]()
__________________
135G Mixed Reef. Bullet 2, 25 gal refugium, 2 X250W MH + 4X 96W PC\'s, DIY Calcium Reactor, Coralife 1/6 HP Chiller, Phosban, Tunze, 2 closed loops & SQWD\'s, Seios, Coralife 4 stage RO/DI & a bunch of other expensive gadgets... I may never retire, but I'm gonnahavahelluvanaquarium! |
#6
|
|||||
|
|||||
![]() I am currently running a Sieo 1100 in a 44g cube. In my 190g I have 2 6200 Tunzes with a 7095 controller in addition to a closed loop powered by a Sequence Hammerhead pump. I have 2 Tunze 6100 in my 230g tank on the same controller. I don't believe there is any comparison when it comes to the Tunzes and the Seios but have never tried the larger 2600. I have in the past used the smaller Tunzes (can't remember model # but the ones that don't run on a controller) - they give a nice flow pattern but the real benefit of the Tunze is seen when used with a controller.
The Tunzes do make a serious dent in you wallet but IMO nothing even comes close for powerheads. When/if I ever get my 300g cube set up I am not going to put a closed loop system on it but will be using 4 6200 Tunzes for water flow with a possiblilty of using a wavebox (or 2) as well. |
#7
|
|||||
|
|||||
![]() The Seio 2600, while it did move tonnes of water, is huge. Imagine putting a size 7 shoe in your tank. That's about the size
![]() I tried a Tunze 6100 out. Beautiful piece of equipment, but I do wish they would develop a better mounting system than those cheapo plastic bits they provide.
__________________
32"x32"x20" Cube-ish tank |
#8
|
|||||
|
|||||
![]() Don't they have magnetic holders?
The size isn't a HUGE deal, because I can hide it behind rockwork that is shaped into a circle through which the powerhead will just poke out. Is the Seio 2600 significantly larger than a Tunze 6100? |