Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 05-19-2006, 07:03 PM
christyf5's Avatar
christyf5 christyf5 is offline
Staff
 
Join Date: Aug 2001
Location: Nanaimo
Posts: 9,175
christyf5 is on a distinguished road
Default

Likely the problems do stem from your tap water. RODI is definitely the way to go and even if you can get your hands on some water from the purified water store it will definitely reduce the nutrients in the tapwater that are possibly fuelling your algae. In the meantime, the 20 gallon water changes are definitely a good place to start. If you can afford to do larger water changes they will certainly help as well, that way you can dilute out as much of the nutrients as possible.

What do you have for circulation? The purple slime algae seems to like areas with less water movement.
__________________
Christy's Reef Blog

My 180 Build

Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
Reply With Quote
  #2  
Old 05-19-2006, 09:03 PM
danny zubot's Avatar
danny zubot danny zubot is offline
Member
 
Join Date: Apr 2004
Location: Castlegar BC
Posts: 3,469
danny zubot is on a distinguished road
Default reply

Quote:
the 20 gallon water changes are definitely a good place to start.
I would agree if you were replacing the water with RO/DI, but changing your water with tap water is only replacing the possible causes of the algae bloom, IE Phosphates. In many places there are high PO4 levels. Try using a PO4 sponge (remover)

Of course every new tank experiences some form of bloom.
__________________
THE BARQUARIUM:
55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's.

Fully stocked with fish, corals and usually some fine scotch
http://www.canreef.com/vbulletin/showthread.php?t=55041
Reply With Quote
  #3  
Old 05-20-2006, 07:38 PM
DanG's Avatar
DanG DanG is offline
Member
 
Join Date: Mar 2005
Location: Peg City
Posts: 609
DanG is on a distinguished road
Default

One thing that can lead to algae (in addition to what was mentioned above) is low alkalinity.
Reply With Quote
  #4  
Old 05-21-2006, 03:29 AM
Palster's Avatar
Palster Palster is offline
Member
 
Join Date: Mar 2006
Location: Kelowna B.C.
Posts: 156
Palster is on a distinguished road
Default

I am doing a 25 gallon water change tomorrow morning with R/O water (just finished mixing the water) As for circulation I have a pump in the sump moving about 700 gph after elevation loss is factored in and I also have a fairly large power head in the tank as well. The purple slime algae does seem to collect in the areas with the least water movement though. Should I be able to get a PO4 sponge at most aquarium stores?
Reply With Quote
  #5  
Old 05-21-2006, 05:26 AM
seashells's Avatar
seashells seashells is offline
Member
 
Join Date: Sep 2005
Location: Surrey
Posts: 302
seashells is on a distinguished road
Default

Reasonably accurate test kits are either Salifert or Hach. RO/DI water is the way to go. An inexpensive RO/DI unit is AquaSafe which can be found on ebay. It's made in North Vancouver. You should test for phosphates. Also the amount and type of food you feed to your fish can put phosphates into the system. Using a phosban reactor and rowaphos works good for the phosphates. Nitrates are probably better reduced by frequent water changes.

Doug
Reply With Quote
  #6  
Old 05-22-2006, 04:57 AM
Palster's Avatar
Palster Palster is offline
Member
 
Join Date: Mar 2006
Location: Kelowna B.C.
Posts: 156
Palster is on a distinguished road
Default

Thanks for the tip on the Aqua Safe R/O units. I managed to find them on Ebay and they are much cheaper than I expected. I plan on ordering one soon.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 03:11 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.