need help starting my nano

[i have crabs]

in a 10g if you want the water to stay good enough for the corals limit yourself to mabey 2 small fish,and instead of a powerhead why not get 2 filters to provide flow if you only keep 1 get a mj600 not the 400 i had 2 400's in my old 20g and i felt ripped off for my 60bucks,as far as the skimmer goes if you keeping corals i would get a prysm pro skimmer mabey a used one if possible just because the surface skimmer will keep the top of the water from getting that oily film wich can be a big pain/problem in a small tank.

[TheReefGeek]

I would setup a 5 or 10g sump with a small skimmer on it. The tank will really benefit from the additional water volume, and you can keep all your filters and heater hidden which in a small tank is really nice. Or depending on your tank locations, hook the 10g and 55g together with a common sump.

In a 10g with a sump I would do:

Clownfish x 2
Green or yellow clown goby
Cleaner shrimp
Snails
Couple hermits

Under 96w lights I would keep:

Feather duster
Toadstool
Xenia
Kenya tree
Zoos
Star Polyps
Mushrooms
Colt

If all goes well in a few months could try high up in the tank:
Frogspawn
Hammer
Torch
Plate
Candy cane

[niloc16]

thanks alot. i have a prizm that i just took off the 55g but i was given the sales pitch on it when i first started, and because i didnt do enough research on it. so i upgraded it to a remora aqua c. i was thinkin of using the prizm on the 10g but i didnt know if it was necessary. my plan was to get a coule percula's but i wanted some input first. now with the maxijet 600 should i get an adapter to go that rotates for wave motion or is directing it off the glass sufficient.

[TheReefGeek]

I would use 2 powerheads, and direct them upwards and towards each other. This will give more random flow, and break the surface tension of the water for you.

You can always put the prizm on if you need it. You can run it occasionally as well, because it is a bit unsightly.

[niloc16]

the prizm does look pretty bad on the back. thats a good idea for the orientation of the powerheads. currently i use maxijets on my 55g, would seio's be better in the nano or stick with some more maxijets. i find the maxijets quiet so im concerned about switching.

[TheReefGeek]

Seio's take up more room, so in a nano that should be a concern too.

I don't know about the noise factor for Seio's.

[dufferdan]

I agree with ReefGeek on on maxijets placement. I would use the skimmer, unless you plan on weekly water changes. (I would still use it regardless) I'm a big proponent of skimming, can't skim enough.
Cheers
Dan