black pvc...

[AndyL]

Originally Posted by G1GY

If you go to the trouble and expence to make ro/di water for your reef, why would you want to use material that is not rated for potable water?

I realize that it might not kill stuff, but it's not going to help anything either.

Why would one not use material that is already in each and every one of our reefs - simply because it's not rated for potable water?

If our powerhead's housings are made out of ABS plastic, and we know those are safe in our tank... Why can one not use that same material for plumbing? There are many tanks out there using ABS plumbing...

[muck]

Most Bulkheads are made of ABS aw well.
Its a myth that ABS will leech chemicals into your water.

[aquanot]

Some black plastic items are made from PVC. ABS is meant for drainage,is not pressure rated,toxic when burns or gets too hot. DO NOT USE ANY POWERTOOLS TO CUT OR HEAT TO SHAPE OR FORM IT! If you don't believe me ,get the manufacture's specs for the product and glue and WHIMIS sheets for your own safety.

[StirCrazy]

Originally Posted by aquanot

ABS is meant for drainage,is not pressure rated

Bingo, we can use it on our tanks as the PSI in our systems is low and we do not have to worry about a pressure rating. as mentioned befor skimmer, ca reactors, bulkheads, tank trim, plastic light housings, ect all is made of ABS or has ABS in it. not a problem for our use.

Steve

[seashells]

Use can use the same glue for Sch 40/80. Make sure it is for PVC. Many people have good success painting their pvc.

Doug

[niloc16]

does any white pvc work, or is there something special