![]() |
|
#1
|
|||||
|
|||||
![]() So, my new tank is ready for pick up... and I will need to build a stand, buy a few things.. etc..
I just had a question about heaters. I have a 150w heater.. will this be sufficient for a 50g cube? I know it's a dumb question, but.. I just have no clue. Seems like something I should know ![]()
__________________
20g BB Mixed Reef // Coralife 150w HQI // AquaC Nano // Koralia 1 & Seio 820 // Jager 200w // AC50 |
#2
|
|||||
|
|||||
![]() I would get two heaters, probably 2 x 100w, instead of one large watt heater in case the large heater fails on the "on" position.
|
#3
|
|||||
|
|||||
![]() Alrighty. So, 2x100w heaters.. any brand recommendation? (something reliable, for a decent price?)
Thanks Bev.
__________________
20g BB Mixed Reef // Coralife 150w HQI // AquaC Nano // Koralia 1 & Seio 820 // Jager 200w // AC50 |
#4
|
|||||
|
|||||
![]() ebo has some very good heaters.
|
#5
|
|||||
|
|||||
![]() Yes, and don't confuse Ebo with Jebo. Ebo-Jager I think is the full name of the good ones.
__________________
Steve |
#6
|
|||||
|
|||||
![]() Thanks guys, I'll be sure to look into the Ebo's
![]()
__________________
20g BB Mixed Reef // Coralife 150w HQI // AquaC Nano // Koralia 1 & Seio 820 // Jager 200w // AC50 |
#7
|
|||||
|
|||||
![]() Quote:
Trying to heat a large amount of water means that the small heater has to stay on longer, increasing the chances for the contacts in to be fused together. (Always in the on position) Just my opinion though.
__________________
Gary CAN'T WE ALL JUST GET A BONG!?! ´¯`·.¸¸.·´¯`·.¸ ><((((((º>´¯`·.¸¸.·´¯`·.¸ ><((((((º> `·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º> `·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((º> ´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((((º> ´¯`·.¸¸.·´¯`·.¸¸.·´¯`·.¸ ><((((((º> |