![]() |
#21
|
|||||
|
|||||
![]() I second the Kalkwasser AND Calcium Reactor... and people... stop buying Kent and other Aquarium Calcium Chloride products... go to a pool & spa place and buy a HUGE bucket for $20!!! EXACTLY the same product.. (77% Calcium Chloride - rest is moisture)
Steve is correct in saying that extended use of Calcium Chloride will eventually skew the chloride balance, hence using Kalk or a Ca Reactor for Calcium maintenance and only using Calcium Chloride for adjustments.. Oh.. one other thing... EPSOM salts to raise Magnesium... also I think helps offset the Chloride imbalance from using Calcium Chloride... but better ask chemist John about these things to be certain.. I hand it over to you Islandreefer... ![]() ![]()
__________________
135G Mixed Reef. Bullet 2, 25 gal refugium, 2 X250W MH + 4X 96W PC\'s, DIY Calcium Reactor, Coralife 1/6 HP Chiller, Phosban, Tunze, 2 closed loops & SQWD\'s, Seios, Coralife 4 stage RO/DI & a bunch of other expensive gadgets... I may never retire, but I'm gonnahavahelluvanaquarium! |
#22
|
|||||
|
|||||
![]() Quote:
steve
__________________
![]() Some strive to be perfect.... I just strive. |
#23
|
|||||
|
|||||
![]() Steve,
I'm pretty sure epsom salts are Mg sulphate (or sulfate, can never remember which), not Mg chloride. reeferaddict, With the amount of epsom salts needed to maintain Mg over long periods of time, sulphate (or sulfate) in the tank will go out of whack much more quickly than chloride would if using Ca chloride. I certainly agree with both of you that dripping kalk to help maintain alk and Ca, then use a Ca additive to top up levels when it is required. Mg, on the other hand, is not a component in kalk to any significant degree, and would have to be added in much larger doses than Ca ever would. Using a Ca reactor with the right media would probably solve a lot of chemistry problems, but I'm never going to have one, and many others are likely in the same boat as I'm in. As a result, I drip kalk nightly and adjust alk, Ca and Mg every week or two, though I should be more consistent and do it weeklly. FWIW, here's the DIY additives article.... http://reefkeeping.com/issues/2006-02/rhf/index.php |
#24
|
|||||
|
|||||
![]() beverly,do you use randy's recipe and does it work good for you?
|
#25
|
|||||
|
|||||
![]() Quote:
![]() Cheers, ![]()
__________________
Mark. |
#26
|
|||||
|
|||||
![]() Quote:
I do use baking soda and "baked" baking soda for alk, though. But don't know where to find most of the products he talks about, and don't want to spend the time finding out. I pretty much use Kent's additives, but after the Kent salt fiasco, I'm not sure if I want to continue using their products at all. Am kind of looking around for alternative brands of additives. Any input would be great. Last edited by Beverly; 03-16-2006 at 10:06 PM. |
#27
|
|||||
|
|||||
![]() Quote:
Cheers,
__________________
Mark. |
#28
|
|||||
|
|||||
![]() Quote:
__________________
65 gallon tank, 3 gallon refugium, 90lbs LR, 50 lbs live sand, Coralife Super Skimmer 125, 24" 250 watt DE Pendant w/14K Hamilton. 1 ocellaris clowns,1 Tomini Tang, 6 line wrasse, 12 turbo grazer snails, 12 nassarius snails, 12 Cerith. Open Brain, Metallic Green Brain, candy cane coral, 1 enchino frags, and 2 maxima clam. |
#29
|
|||||
|
|||||
![]() Ron,
Have asked this question on RC's chemistry forum and Randy replied with the following threads and articles.... "The new Seachem salt mix is seemingly a big improvement over the old Seachem mix, which had greatly elevated borate: The Composition Of Several Synthetic Seawater Mixes http://web.archive.org/web/200012150.../1/default.asp Boron in a Reef Tank http://www.advancedaquarist.com/issues/dec2002/chem.htm The new Seachem mix is lower, but still has higher than NSW borate (apparently). I've battled the Seachem folks here in this forum on their borate alkalinity kit, which I do not recommend: http://reefcentral.com/forums/showth...hreadid=756622 The Seachem Borate Alkalinity Test Kit http://www.advancedaquarist.com/issu...e2003/chem.htm Finally, Phosguard releases aluminum: Aluminum and aluminum-based phosphate binders http://www.advancedaquarist.com/issu...y2003/chem.htm and a follow up discussion with Seachem about it and some new data: New Aluminum Release Data for Phosguard http://reefcentral.com/forums/showth...hreadid=219105" Have read a few of the articles and threads, but not all of them yet. Was thinking about Seachem products as an alternative to Kent's, but now I'm not so sure. Folks on RC's thread about Kent's low alk have been talking up a storm about Tropic Marin salt, but don't know what other products they produce. If you haven't already read it, here's RC's continuing thread on the low alk Kent salt issue for further info.... http://reefcentral.com/forums/showth...5&pagenumber=1 |
#30
|
|||||
|
|||||
![]() Quote:
![]() ![]() Anyhoo...cheers ![]()
__________________
Mark. Last edited by Johnny Reefer; 03-19-2006 at 03:12 AM. Reason: Damn typos |